Can't find setting the clock instructions in manual

Follow this instructions to set the clock using the COMAND controls: 1. Press the SVC button. 2. Highlight and select System Settings by rotating and clicking the rotary knob. 3. Highlight and select Settings. 4. Highlight and select Date/Time on the settings menu and press to confirm. The menu displays the date and the time with the minutes highlighted. 5. Press the right-hand rotary/button (on newer systems, use the arrows to select minutes or hours). When setting mode is active, the minutes will be highlighted. 6. Turn the right-hand rotary/button to the right. Each click or press will move the time ahead in one-minute increments (on systems without a rotary knob, the up or down arrow is used to adjust minutes or hours; with GPS reception, the time is changed in 30-minute increments). 7. Turn the right-hand rotary/button to the left. Each click or press will move the time back in one-minute increments (with GPS reception, the time is changed in 30-minute increments). 8. To exit the system, press the Back button or hold the rotary/button for more than two seconds (on newer systems press the Back key or OK to save your settings).