Crank no start getting gas and spark

It ran hot for the first time as soon as it did i pulled over let it cool and it wouldnt start back up put screw driver in spark plug wire put it to frame (getting spark )changed fuel filter crank shaft sensor check coils they also getting spark pushed gas nozzle getting gas switched relays but look like i have a leak by the tank. My trunk open when it want so couldnt get to inertia switch

You have got to get to that inertia switch SOME-HOW! .. Can hit a pothole in the road OR simply pulling over to the side of the road is ALL it takes to trip the switch to off! .... I still strongly believe that's the problem!

Thank you sir. Will it still get gas to the engine but low pressure to cause it to not start? I'll just have to bust trunk open but if i had a diagram to the exact spot i can get it from the back seat. I know it should be driver side trunk bar but never had to hit one so i never pay attention Will a gas leak stop it from starting? But engine still gas. Poured gas in engine still crank no start. I appreciate the help this is killing me

Listen for fuel pump turning on for 2 seconds when key is turned on.. IF pump is heard, it's not the inertia switch... May need a helper to turn key on while you listen at fuel filler with cap removed.

Its coming on (fuel pump) and squirt out the nipple under hood pulled injectors up gas cam out put gas in throttle same result just spinning

Do a compression test on the cylinders that easiest to get to .. Post results. IF you don't have access to a compression gauge .. Can get one from AutoZone - loan a tool.

Ok ill try that next

✔️