Which fuse is the one for the fuel pump

This is a complex electrical system to run the pump with several fuses involved. The best test is to check for 12 volts at pin 30 of the fuel pump relay key off and 85 with the key on. If you have power there the main feed is good. Apply power to pin 87 in the relay slot and the pump should run if it is good. Control of the relay is done by both the ASD (automatic shut down relay) and the engine computer. They respectively provide power and ground to operate the fuel pump relay. If you do not have power on pin 30 use a test lamp to check each fuse in all the boxes to make sure they are good. You should look at fuses 6, 19, 24 and 26 in the Power Distribution Center (where the relay is) and fuse 12 in the Junction Block (the other fuse block) John Miller Freedom Automotive Auto Mojo Radio Show