My Transmission Seem to Not Go In Drive And I Do Not Have A Transmission Dips trick were I can check it. How can I check the trans myself to see how full or low is the fluid is.

1. Park the vehicle on level ground and apply the parking brake firmly. 2. Check fluid level with engine running at idle. NOTE: Be sure that the transmission fluid temperature is below 30°C (86°F). 3. Move the selector lever through all gear ranges. 4. Move the selector lever to "Park". 5. Let the engine idle for 3 minutes and open the overfill screw (1). 6. Add released transmission fluid until it flows out over the overfill screw opening. 7. Let engine idle until fluid temperature is between 32° C (90°F) and 57°C (135°F), then close the overfill screw (1). Torque: 38 N*m (28 lb ft) NOTE: Check transmission fluid temperature with scan tool. Minimum fluid level - 57°C (135 degrees F) Maximum fluid level - 32°C (90 degrees F) CAUTION: Do not open overfill screw with the engine stopped. CAUTION: DO NOT CHECK FLUID LEVEL UNDER THESE CONDITIONS: - Immediately after driving at sustained highway speeds. - In heavy city traffic during hot weather. - If vehicle is towing a trailer. If the vehicle has been operated under these conditions, shut the engine off and allow the vehicle to "cool" for thirty (30) minutes. After the cool down period, restart the vehicle and continue from step 2 above. This does not have a dip stick. We can check it for you , however I see by your location the vehicle would need to be towed to palatine. thanks, Ira Action Auto Services 224-801-6094