What is your question?
·
·
What is your question?
I replaced all the sensors, fuel pump is new, fuel injectors are new, fuel pressure regulator is new, maf sensor is new, idle air control valve is new, air intake temperature sensor is new, TPS is new, knock sensors are new, cam and crank position sensors are new, coolant temperature sensor is new, pcv valve is new, purge valve is new, maf sensor is new, ignition coil pack is new, I even tried to replace the ECU, it still stalls out when I hit the gas pedal. When it's cold, it starts right up, it idles fine. Even after 30 mins idling it don't stall out. But as soon as I press on the gas pedal, it stalls right out. Mobile mechanic I know says it sounds like it's getting too much air and when he checked on his scanner, the maf sensor showed it was still connected when he already disconnected it. What can this problem be from? Please help!
What makes this problem better or worse?
When I step on the gas it stalls right out
How long has your 2004 Hyundai Tiburon had this problem?
About a year
1 Reply
Too many parts replaced without need, causing a real variable here that is going to be difficult to get past. What are the diagnostic trouble codes that have been set? I tend to agree with "too much air" but don't know why -- hands on inspection would be needed. Also it seems the concern happens more during "closed loop" when the engine is at operating temperature and the processor is reading all inputs to create a good running condition by varying the different elements as needed to run the vehicle. How is the engine operating temperature? Use this link to find some shops near you that can help with your concern: www.repairpal.com/repair-shops