What is your question?
·
·
What is your question?
So I went to replace the spark plugs to prevent any problems later and should have looked on line to see if there were any problems and the plugs break off in the head. Well 2 broke off and I was able to get the tool to get the bottom half of the plugs out. I put new plugs in and now the truck runs really rough under throttle ideal is finebut driving it shakes the whole truck. The truck ran fine prior to pulling the plugs. Please help
1 Reply
Looks like there is a misfire from at least one - or more cylinders. Make sure of the following: - the correct Motorcraft plugs are installed - the electrodes did not bend, the gaps are correct - the ceramic insulators are not cracked - you didn't cross-threaded the cyl.head - used the right torque, they are not loose - the electrical connectors are connected to the coils correctly - if you removed any ground cables they are reattached correctly. Zee