What is your question?
·
·
What is your question?
fuel injection service? interior air filter? cooling front seats filter?
1 Reply
We follow the manufactures recommendations not the dealers! The dealers always tack on extras. MAINTENANCE @30,000 MILES according Ford USA AUTOMATIC TRANSMISSION FLUID - INSPECT - [If equipped with an underhood fluid level indicator. ] BRAKE SYSTEM - INSPECT - [Inspect brake pads, shoes, rotors, drums, brake lines, hoses and parking brake system. ] ENGINE COOLING SYSTEM HOSES & CLAMPS - INSPECT EXHAUST SYSTEM & HEAT SHIELDS - INSPECT FRONT AXLE - INSPECT - [Inspect and lubricate 4WD front axle shaft U-joints (if equipped). ] HALF SHAFT DUST BOOTS - INSPECT - [If equipped. ] STEERING COMPONENTS - INSPECT - [Inspect steering linkage, suspension and if equipped, driveshaft, ball joints and U-joints. ] BALL JOINTS - INSPECT/LUBRICATE - [Inspect and lubricate ball joints (if equipped with zerk fittings). ] MULTI-POINT INSPECTION (RECOMMENDED) - PERFORM AIR CLEANER ELEMENT - REPLACE CLIMATE-CONTROLLED SEAT CUSHION FILTER - REPLACE - [If equipped. ] ENGINE OIL - REPLACE ENGINE OIL FILTER - REPLACE FUEL FILTER - REPLACE TIRES - ROTATE - [Retighten the wheel nuts to the specified torque at 800 km (500 mi) after any wheel disturbance (tire rotation, changing a flat tire or wheel removal). Rotate tires, inspect tires for wear, measure tread depth and inspect wheel ends for end play and noise. For vehicles with different front-to-rear tire pressures, the tire pressure must be adjusted and the tire pressure sensor training must be done. ]