Hello i have a creon vic 2010 that was running good intell recently i accidently sparyed my driver side floor board with a power washer. The air conditioning that once worked 100% now will not turn on at all. I turned the A/C controll nobs but i here just air pressure with a hiss noise. Well i was very hot this summer so i tryed to put a converter box of 400 amps in my car then plugged a 120v indoor home fan in the converter box then plugged my converter box into my lower assesseries port. When i did that and turned the fan on it made my converter box make a loud pitch noise. I checked to see if the car was ok and it wasnt and it was in fact worse now the radio want turn on, my power locks and windows want work,my defroster is out,my power windows and defroster on windows is out, ac and heater want blow out air. Please help i dont know what to do. On my driver side closest to the emergency break pedal therea a grey looking box that has wires plugged in on each side of it. It looks like a wire harness adapter of some sourt. Theres a burn mark on two of the port holes were wires go in. On i can visibily see is pink. Also i did blow a 20 amp fuse but i replaced it and checked all fuses but it did no change to the car.
RepairPal Certified shops can diagnose and repair your 2010 Ford Crown Victoria. They provide transparent pricing with a minimum 12-month or 12,000-mile warranty on repairs and services.
first thing is "accidentally" power spraying that area inside the car or any area inside the car.2nd thing (maybe) is plugging up converter/inverter to the vehicle? suggest TESTING ALL fuses you can find on your car with a test light with the key on(takes less than 5 minutes).then you still may have to take it to an alternator/generator repair shop.
