I replaced my thermostat radiator and my water pump it is still overheating

I did but im not sure if i did it correctly how do you bleed it

copy and paste the link,and read it!you can't do it the way explained,cause you have already added coolant .you are just gonna have to crack the valve open with the car running to get the air out,probably several times.just crack it open,let air out,when coolant comes out,close it.do it several times. Dodge Intrepid What is the correct procedure for bleeding www.justanswer.com › Dodge

K when i did it there was just smoke no coolant came out maybe i didnt do it long enough ty

that would be steam/air.do it several times till coolant comes out,close it off and do it again a few min. later.don't let it run up in the RED when doing it.add coolant as needed.

K ty will keep you posted do i bleed it with the coolant cap open or closed

closed,be very carefull doing this,don;t get burned!if you need to ,put a hose on the bleeder valve,so the coolant don't get on you or the belts,etc!safety!!!

K ty you for your help i will try it

10-4

Ot dont spit out no antifreeze from bleeding just steem and air

is the coolant/antifreeze full?you probably need to add coolant!

Wich way should my water pump spin to the right or left