No fuse sign on dash board

From the shop manual: "Each time the cluster receives an electronic message from the Front Control Module (FCM) indicating the Ignition-Off Draw (IOD) feed for the cluster is an open circuit, the cluster replaces the displayed odometer/trip odometer value with the textual message, NO-FUSE. This message indicates that the IOD fuse is missing, blown or that the IOD feed circuit is ineffective. Unless the problem is corrected, this message will latch and remain displayed during the current and each subsequent ignition cycle until the trip odometer reset button is pressed and released momentarily, which will revert the display to the odometer/trip odometer information that was last displayed for the remainder of that ignition cycle. Once the problem has been corrected, either momentarily pressing the trip odometer reset button or cycling the ignition switch will unlatch the message and return the odometer/trip odometer to normal operation." Sounds like some diagnostic testing related to that circuit is needed. Check the fuses on the interior fuse block first. A blown fuse is indicative of a circuit concern; it should not blow if all is well. But it's a good place to start checking.