replace light bulbs

You will need to remove the headlight assembly first. Then you can access the turn signal/parking light assembly. There is one bolt and one pin that must be removed to get the headlight assembly out. Once you remove the headlight assembly, there are three nuts that secure the turn signal/parking light assembly from the back. Diagrams would be real helpful here, but I do not have access to any. Sorry. Hope this helps.

1. Lift the hood. 2. Locate the lock pin for the headlight assembly, located on the inward side of the housing. 3. rotate the pin from the lock and turn 90-degrees. 4. Lift the pin straight up and remove. 5. Unbolt the 10mm anchor that secures the rear of the housing. 6. Firmly pull the entire housing straight forward, popping the housing from the ball-clip in the back rear of the housing. Being careful to clear the gasket from the fender. 7. Change either headlight or the turn signal bulb. 8. Replace is the opposite. Cheers