replace power window motor

Window Regulator Motor Replacement - Front Door Removal Procedure Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Body and Frame\Doors, Hood and Trunk\Front Door Panel\Service and Repair) . Remove the water deflector. Refer to Water Deflector Replacement - Front Door See: Body and Frame\Doors, Hood and Trunk\Front Door Panel\Service and Repair. Disconnect the electrical connector from the front door window regulator motor. Remove the window from the regulator. Raise the window. Tape the window into position. Remove the front door window regulator motor screws. Installation Procedure Align the front door window regulator motor assembly to the front door window regulator. Notice: Refer to Fastener Notice in Cautions and Notices. Install the front door window regulator motor to regulator screws. Tighten the front door window regulator motor to door screws to 8 N.m (71 lb in). Connect the electrical connector to the front door window regulator motor. Install the water deflector. Refer to Water Deflector Replacement - Front Door See: Body and Frame\Doors, Hood and Trunk\Front Door Panel\Service and Repair. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Body and Frame\Doors, Hood and Trunk\Front Door Panel\Service and Repair) . the motor/regulator is onbe unit. the cables are part of the unit. Roy