What is your question?
·
·
What is your question?
How long should it take and how technical is it to Change Spark plugs on a 2006 BMW 325i 3.0L and dose it have a fuel filter? i would think so but i have been told by a parts store that it dose not have one...
1 Reply
It should only take someone with basic automotive skills about an hour and a half to replace the plugs. Just make sure the engine is cold, you use ONLY OEM parts, and don't "drop" the plugs into the hole. Use the boot off an old spark plug wire or a spark plug socket with a rubber grommet on it to hold the spark plug so you can place it in the hole nicely. You don't want to risk cracking a plug or closing the gap. Most OEM plugs will come pre gapped. But I check the gap anyways just to make sure it's right. You will find the correct gap on the Catalyst sticker found under the hood. The fuel filter is in the tank. I wouldn't recommend replacing that yourself. Best of luck
OK thanks yea iv been putting it of but it needs to be done have had all of the parts just haven't done it ! Lol what about the rear end or trans fluid when should i change that ? i am ASE but i don't really work on BMWs not sure why i bought one lol
AllData says that for an automatic transmission the service interval is 100k. You will have to check and fill that from the bottom. It requires some special tools. So I would suggest that you take it to the dealer or a shop in your area that specializes in BMW. Best of luck bud!