speedo needle behind stop in

disconnect the battery cables 1st,negative 1st,positive last,then wait 30 minutes,then you will need to remove the Bezel around the cluster first before removing the instrument cluster panel from the dash(lower steering wheel all the way down),removing screws,etc,unplugging the connectors in the rear of it,and other connectors. once you have it out,remove the clear plastic face on the front carefully,then *GENTLY* lift up on the needle without bending it and set the needle on the other side of the peg/stop tab. use a bent paper clip to lift the needle just enough to clear the tab "gently"....copy and paste the video link below,watch the video,you will see the tabs on the clear front to remove it,not shown in video....piece of cake! https://www.youtube.com/watch?v=qO3tYBOitaQ