The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
A faulty cruise control module will simply result in deactivation of cruise control settings. This is because a detected error in the cruise control system could lead to hazardous driving conditions, so the module will be disabled, and the cruise control system warning light will be displayed. This will be a different message depending on make and model, and a warning light or message may be displayed on the driver instrument cluster.
When troubleshooting cruise control issues in your Oldsmobile LSS, it's essential to adopt a methodical diagnostic approach. Begin by checking the fuses associated with the cruise control system, as a blown fuse can be a straightforward fix that restores functionality. Next, inspect the brake pedal and throttle body, as any malfunctions in these components can directly affect cruise control operation. If these initial checks do not resolve the issue, utilize a diagnostic scanner to uncover any error codes that may indicate deeper problems within the system. Pay particular attention to the speed sensor, as its failure can disrupt cruise control performance. Additionally, consider other potential causes such as a faulty brake light or brake switch, which can also lead to cruise control malfunctions. By following this structured approach, you can effectively identify and address the root causes of cruise control issues, ensuring a safer and more reliable driving experience.
When diagnosing cruise control malfunctions in an Oldsmobile LSS, it's essential to consider several common problems that could be affecting the system's performance. One of the first areas to check is the fuses; a blown fuse can interrupt the power supply to the cruise control, rendering it inoperative. Additionally, the brake pedal position sensor plays a crucial role in cruise control functionality; if this sensor is faulty, it may incorrectly signal that the brakes are engaged, disabling the system. Throttle body issues can also disrupt cruise control, as they directly affect the vehicle's speed regulation. Furthermore, problems with the PRNDL or shifter position switch can lead to similar malfunctions, as these components are integral to the cruise control's operation. A defective brake pedal switch is another frequent culprit, as it can prevent the cruise control from engaging. In older models, a broken vacuum line or damaged vacuum actuator can significantly impact the system, as these components are vital for maintaining the necessary pressure for cruise control to function. Lastly, any engine-related issues, including a lit check engine light, should not be overlooked, as they can also hinder the cruise control's performance. By systematically checking these components, you can effectively troubleshoot and resolve cruise control issues in your Oldsmobile LSS.
When the cruise control in your Oldsmobile LSS fails to operate, it’s crucial to address the issue promptly to avoid potential safety risks and further damage to your vehicle. Start by inspecting the fuse associated with the cruise control system, as a blown fuse can easily disrupt its functionality. Next, examine the brake pedal switch; if this component is defective, it may falsely signal that the brakes are engaged, preventing the cruise control from activating. Additionally, consider the throttle control system and the ABS, as malfunctions in these areas can also lead to cruise control issues. In older models, a broken vacuum line is a common culprit that can hinder the system's performance. By systematically checking these components, you can identify and resolve the problem, ensuring your cruise control operates safely and effectively. Remember, neglecting these symptoms could lead to more significant issues down the line, so it’s best to tackle them sooner rather than later.
Read about related problems experienced by other Oldsmobile LSS drivers like you.
See what others are asking about their Oldsmobile LSS. Get answers from RepairPal's community of auto experts and enthusiasts.