2018 Nissan Rogue Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2018 Nissan Rogue and How to Fix Them

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2018 Nissan Rogue cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2018 Nissan Rogue cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

What are the steps to diagnose the cruise control issue in a 2018 Nissan Rogue?

When diagnosing a cruise control issue in a 2018 Nissan Rogue, it's essential to adopt a systematic approach that begins with the simplest solutions before progressing to more complex diagnostics. Start by checking the cruise control fuse, as a blown fuse can often be the root of the problem. Next, inspect the cruise control buttons on the steering wheel to ensure they are functioning correctly and not stuck. If these initial checks do not resolve the issue, utilize an OBD-II scanner to scan for any error codes that may indicate specific malfunctions within the cruise control system. Following this, test the cruise control module to confirm it is sending signals properly. Additionally, examine the speed sensors to ensure they are providing accurate data, as faulty sensors can disrupt the cruise control's operation. Finally, inspect the wiring and connections for any signs of damage or corrosion that could affect the system's performance. If these steps do not lead to a solution, consulting a professional mechanic may be necessary to further diagnose the issue. This methodical approach not only helps in identifying the problem efficiently but also saves time and resources in the DIY process.

What are the common problems that could cause the cruise control to stop working in a 2018 Nissan Rogue?

When the cruise control in a 2018 Nissan Rogue ceases to function, it can be frustrating, but understanding the common problems can help you troubleshoot effectively. One of the primary culprits is a faulty brake pedal switch, which can either prevent the cruise control from engaging or cause it to disengage unexpectedly. Additionally, a malfunctioning speed sensor can disrupt the system's ability to maintain a consistent speed, leading to erratic behavior. Another issue to consider is a blown fuse, which can completely disable the cruise control system. If these components check out, the problem may lie within the cruise control module itself, which, if defective, may fail to communicate with other vehicle systems. Lastly, throttle control issues, such as a stuck throttle or problems with the throttle position sensor, can also hinder cruise control operation. By systematically examining these areas, you can identify and address the root cause of the cruise control failure in your Nissan Rogue.

How urgent is it to address the malfunctioning cruise control in a 2018 Nissan Rogue?

When it comes to a malfunctioning cruise control in a 2018 Nissan Rogue, the urgency of addressing the issue cannot be overstated. A faulty cruise control system can lead to unpredictable vehicle behavior, such as sudden acceleration or deceleration, which significantly increases the risk of accidents on the road. Ignoring these symptoms not only jeopardizes your safety but also that of other drivers and pedestrians. Moreover, delaying repairs can exacerbate the problem, potentially leading to more extensive and costly damage to the vehicle's systems. Therefore, it is crucial to have the cruise control inspected and repaired as soon as possible by a qualified mechanic or dealership. Taking swift action ensures that your vehicle operates safely and efficiently, allowing you to drive with confidence.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.