Mitsubishi Endeavor Is Leaking Oil

Discover the Common Causes of Oil Leaks in Your Mitsubishi Endeavor and How to Fix Them Effectively

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
80% chance it's the
Oil System Components
0%
20% chance it's the
Engine Gaskets
The most common reasons a Mitsubishi Endeavor is leaking oil are oil system component failure and leaking engine gaskets.
  • Oil System Components: A worn or damaged oil pump or filter can lead to low oil pressure, resulting in inadequate lubrication and potential engine damage.
  • Engine Gaskets: A worn or damaged engine gasket can lead to oil or coolant leaks, resulting in engine overheating or loss of lubrication.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a Mitsubishi Endeavor is leaking oil?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Oil pans don't wear out or break like other parts, they generally only need to be replaced because of external damage from an accident or an improperly tightened drain plug. The main symptom you will experience is an oil leak underneath the engine of your car. The oil that leaks from a damaged oil pan will range from dark brown to dark black. If the leak is large enough or occurs for long enough the oil level will be low enough to turn the oil pressure or low oil level warning light on.

The engine oil pressure warning light will come on if the engine oil pressure is low, or if the oil pressure sensor is faulty. In either case, engine power may be reduced significantly. The check engine light may also illuminate, and an on-board diagnostic (OBD) trouble code will be stored in the vehicle's computer.

How to Diagnose and Fix Oil Leaks in a Mitsubishi Endeavor?

When tackling oil leaks in your Mitsubishi Endeavor, start by inspecting the ground beneath your vehicle for any signs of oil accumulation, as this is often the first indication of a leak. Once you identify the presence of oil, clean the engine area to remove any residue, which will help you see where the oil is originating from. Adding a dye to the engine oil can be a useful method to trace the leak more accurately. Keep an eye out for symptoms like blue smoke from the exhaust, which may indicate burning oil. If you find a specific leak, consider using an oil leak stopper as a quick and cost-effective solution; simply pour it into the oil fill hole. However, if the leak continues, you may need to identify the exact component causing the issue and either repair or replace it. By following this structured approach, you can effectively diagnose and address oil leaks, ensuring the longevity of your vehicle and avoiding expensive repairs down the line.

How to Address Oil Leaks in a Mitsubishi Endeavor?

When tackling oil leaks in your Mitsubishi Endeavor, understanding the common problems that can arise is essential for effective DIY repairs. One prevalent issue is worn-out drain plugs, which can lead to oil seeping from the oil pan. Additionally, damaged gaskets, particularly around the valve cover and oil filter, are frequent culprits that can cause leaks. Oil system component failures, such as a malfunctioning oil pump or a cracked oil pan, can also contribute to this issue. Regularly inspecting your vehicle for oil spots on the ground or signs of oil accumulation around engine components can help you identify these problems early. If you discover a minor leak, consider using an oil leak stopper, which can be added directly to the oil fill hole as a temporary fix. However, for more severe leaks or if you cannot locate the source, it is wise to consult a professional mechanic who can accurately diagnose and repair the issue. By being proactive with maintenance, including routine oil changes and inspections, you can significantly reduce the likelihood of oil leaks and ensure your Mitsubishi Endeavor remains in optimal condition.

How to Address an Oil Leak in a Mitsubishi Endeavor?

Addressing an oil leak in your Mitsubishi Endeavor is crucial not only for the longevity of your vehicle but also for your safety on the road. Ignoring an oil leak can lead to severe engine damage, increased repair costs, and even hazardous driving conditions due to low oil levels. Start with a thorough visual inspection to identify any obvious signs of leakage, such as oil stains or puddles beneath the vehicle. Pay special attention to common leak points like the oil filter and drain plug, ensuring they are secure and undamaged. If you discover a minor leak, consider using an oil leak stopper, which can be a quick and cost-effective fix. However, if the leak persists, it’s essential to pinpoint the source by cleaning the area and using dye in the engine oil to track the leak's origin. Remember, an oil leak could also indicate other underlying issues, such as a faulty oil pressure sensor or low oil levels, which require immediate attention. By taking these steps promptly, you can mitigate risks and maintain the health of your Mitsubishi Endeavor.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.