The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2017 Mercedes-Benz E43 AMG, begin with a thorough check of the tire pressure in all four tires using a reliable tire pressure gauge. This initial step is crucial as it ensures that the tire pressure aligns with the manufacturer's recommended levels, which can typically be found in your owner's manual or on a sticker located inside the driver's door jamb. If the pressure is correct, proceed to inspect the tires for any visible damage, such as punctures, cuts, or bulges, as these can lead to pressure loss and trigger the warning light. If no damage is found, the next step is to reset the tire pressure monitoring system (TPMS), as sometimes the system may require a reset to function properly. Should the warning light persist despite correct tire pressure and no visible damage, it may indicate a malfunction in the tire pressure monitoring sensors, which could necessitate replacement. If you are unable to resolve the issue through these steps, it is advisable to consult a certified mechanic or dealership, as they possess the specialized tools and expertise to accurately diagnose and address the problem. By following this diagnostic approach, you can systematically identify and resolve the tire pressure warning light issue, ensuring your vehicle remains safe and roadworthy.
When the tire pressure warning light stays on in a 2017 Mercedes-Benz E43 AMG, it can signal several common issues that DIY enthusiasts can troubleshoot. The first step is to check the tire pressure in all four tires, as low pressure is the most frequent cause of the warning light. If the pressure is within the recommended range, the next potential issue could be a faulty tire pressure sensor. Inspecting the sensor for any visible damage or considering a replacement may be necessary if it appears to be malfunctioning. Additionally, tire pressure sensors are powered by batteries that can wear out over time; if the sensor looks intact but the warning light remains illuminated, replacing the battery could resolve the issue. Calibration problems may also arise, especially after tire changes or maintenance work, so recalibrating the sensors might be needed to ensure accurate readings. Lastly, if all else checks out, a malfunction within the tire pressure monitoring system itself could be the culprit, which may require professional diagnostics. By addressing these issues promptly, you can ensure both your safety and the optimal performance of your vehicle.
When the tire pressure warning light illuminates on your 2017 Mercedes-Benz E43 AMG, it is crucial to act promptly to ensure your safety and the longevity of your vehicle. Start by checking the tire pressure of all four tires using a reliable tire pressure gauge, as maintaining the correct pressure is essential for optimal handling and fuel efficiency. If you find any tires are underinflated, inflate them to the recommended levels indicated in your owner's manual or on the driver's side door jamb. Additionally, take a moment to inspect each tire for visible damage, such as punctures or bulges, which could compromise their integrity and lead to more severe issues if left unaddressed. Once you have adjusted the tire pressures and inspected for damage, you may need to reset the tire pressure monitoring system to clear the warning light. This can typically be done through the vehicle's onboard menu, as outlined in the owner's manual. By taking these immediate steps, you not only enhance your driving safety but also prevent potential long-term damage to your tires and vehicle.
See what others are asking about their Mercedes-Benz E43 AMG. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Mercedes-Benz E43 AMG drivers like you.