2010 Mazda 5 Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2010 Mazda 5 and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2010 Mazda 5 cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2010 Mazda 5 cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the cruise control issue in a 2010 Mazda 5?

When diagnosing a cruise control issue in a 2010 Mazda 5, it's essential to adopt a systematic approach that begins with the simplest checks before progressing to more complex diagnostics. Start by inspecting the cruise control fuse, as a blown or damaged fuse can easily disrupt the system's functionality. Next, examine the cruise control buttons on the steering wheel to ensure they are not stuck or malfunctioning, as this can prevent activation. Utilizing an OBD-II scanner to check for error codes can provide valuable insights into any underlying electronic issues. Additionally, verify the operation of the speed sensors, which are critical for the cruise control system to function correctly. The brake pedal switch should also be tested, as it plays a vital role in disengaging cruise control when the brakes are applied. Finally, inspect the wiring connections for any signs of damage or loose connections that could be affecting the system. If these steps do not resolve the issue, seeking assistance from a professional mechanic with experience in Mazda vehicles is advisable to ensure a thorough diagnosis and repair.

What are the common problems that could cause the cruise control to stop working in a 2010 Mazda 5?

When troubleshooting cruise control issues in a 2010 Mazda 5, it's essential to understand the common problems that may lead to its failure. One of the primary culprits is a faulty cruise control switch, which can hinder the system's ability to engage or disengage as intended. Additionally, a blown fuse can disrupt the electrical flow necessary for the cruise control to function, making it a straightforward issue to check. The speed sensor also plays a critical role; if it malfunctions, the system may struggle to maintain a constant speed, resulting in failure. Another important component is the brake light switch; if this switch is defective, it can prevent the cruise control from activating due to safety protocols. Furthermore, vacuum leaks in the system can lead to erratic behavior or complete failure of the cruise control. Lastly, issues with the throttle cable, whether due to wear or improper connection, can also impede the system's performance. By systematically examining these areas, you can effectively diagnose and potentially resolve the cruise control issues in your Mazda 5.

How urgent is it to address the non-functioning cruise control in my 2010 Mazda 5?

When considering the urgency of fixing a non-functioning cruise control in your 2010 Mazda 5, it's essential to recognize that while it may not pose an immediate safety risk, it should not be overlooked. A malfunctioning cruise control can indicate deeper issues within your vehicle's electrical system or sensors, which could lead to more significant problems if left unaddressed. For DIY enthusiasts, understanding the implications of this malfunction is crucial; it can affect not only your driving comfort but also your vehicle's overall performance and efficiency. By addressing the issue promptly, you can prevent further damage and ensure that your vehicle remains safe and reliable for your journeys. Regular inspections and timely repairs can save you from costly fixes down the line, making it wise to prioritize this seemingly minor issue before it escalates into a more serious concern.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2010 Mazda 5 Cruise Control Not Working: Causes & Repairs