2013 Land Rover LR2 Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2013 Land Rover LR2 and How to Fix Them

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2013 Land Rover LR2 cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Land Rover LR2 cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the non-functioning cruise control in a 2013 Land Rover LR2?

To effectively diagnose a non-functioning cruise control in a 2013 Land Rover LR2, start with a systematic approach that prioritizes simpler checks before delving into more complex diagnostics. Begin by checking the dashboard indicator light; if it illuminates when the system is activated, the basic electrical circuit is likely intact. If not, inspect the relevant fuses, particularly fuse 25 or 30, as a blown fuse can disrupt the system's functionality. Next, examine the brake pedal switch, ensuring it operates correctly since a malfunction here can prevent the cruise control from engaging. If these initial checks do not reveal the issue, proceed to inspect the cruise control switch on the steering wheel for any faults. Additionally, consider potential wiring issues that may affect connections to the brake pedal switch or the cruise control ECU. If all else fails, the problem may lie within the ECU or amplifier, which may require professional assessment or replacement. By following this structured diagnostic approach, you can efficiently identify the root cause of the cruise control malfunction and take appropriate action.

What are the common problems that could cause the cruise control to stop working in a 2013 Land Rover LR2?

When troubleshooting cruise control issues in a 2013 Land Rover LR2, it's essential to consider several common problems that may be at play. One frequent culprit is the vacuum system; cracked or damaged vacuum hoses can disrupt the necessary pressure for cruise control to function properly. Additionally, electrical failures, such as a faulty master switch or a malfunctioning cruise control ECU, can prevent the system from engaging. It's also important to inspect the brake switch and its wiring, as a poor connection can inadvertently disable cruise control. Other components, like the vacuum pump and its associated parts, should be checked for functionality, as they play a critical role in maintaining the system's operation. Furthermore, issues with the clockspring or rotary coupler can affect not only cruise control but also other systems in the vehicle. Lastly, ensure that all sensors and connections are clean and secure, as debris or loose connections can lead to intermittent errors. By methodically examining these areas, you can effectively diagnose and potentially resolve the cruise control malfunction in your LR2.

How urgent is it to address the non-functioning cruise control in a 2013 Land Rover LR2?

While the malfunctioning cruise control in a 2013 Land Rover LR2 may not pose an immediate safety risk, it is still advisable to address the issue sooner rather than later. Neglecting this problem can lead to increased driver fatigue during long trips, which can indirectly affect safety by reducing alertness. Additionally, if the cruise control system is not functioning due to underlying electrical issues, these problems could escalate and impact other vehicle systems, potentially leading to more significant and costly repairs down the line. Therefore, while it may not be urgent, taking the time to diagnose and repair the cruise control can enhance your driving comfort and prevent future complications, making it a worthwhile endeavor for any DIY enthusiast.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.