2009 Land Rover LR2 Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2009 Land Rover LR2 and How to Fix Them

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2009 Land Rover LR2 cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty sensor can lead to incorrect readings, causing issues with engine performance or triggering warning lights on the dashboard.
  • Control Module: A faulty control module can result in erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent acceleration and poor engine response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2009 Land Rover LR2 cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the non-functioning cruise control in a 2009 Land Rover LR2?

To effectively diagnose the non-functioning cruise control in a 2009 Land Rover LR2, start with a systematic approach that prioritizes simpler checks before delving into more complex diagnostics. Begin by ensuring that the clutch pedal is fully released, as this is a crucial prerequisite for the cruise control system to operate correctly. Next, disconnect the cruise control Electronic Control Unit (ECU) connector and use a voltmeter to check for battery voltage at the ECU harness connector. If you detect battery voltage, you can move forward with your diagnosis; if not, this indicates a potential electrical issue that needs addressing. Additionally, check the dashboard light associated with the cruise control to confirm it illuminates, which suggests that the system is receiving power. Following this, inspect all vacuum lines connected to the cruise control system, as leaks or blockages can significantly impact functionality. If the vacuum lines appear intact, consider testing the vacuum pump, as a malfunctioning pump can prevent the cruise control from engaging. By following this structured diagnostic approach, you can efficiently identify and resolve the issues affecting the cruise control system in your Land Rover LR2.

What common issues cause cruise control failure in a 2009 Land Rover LR2?

When diagnosing cruise control failure in a 2009 Land Rover LR2, it's essential to consider the condition of the vacuum hoses and lines. A common issue arises from a damaged or deteriorated vacuum hose that connects to the cruise control system, which can disrupt the necessary pressure and lead to malfunction. Additionally, if the vacuum lines are worn or cracked, replacing them can significantly improve the functionality of the cruise control. Specifically, attention should be given to the thick line that runs from the cruise control module to the actuator, as well as the two smaller lines attached to the module itself. By ensuring these components are in good condition and replacing any faulty hoses, you can effectively troubleshoot and potentially resolve cruise control issues, making it a manageable DIY project for vehicle owners.

How urgent is it to address the non-functioning cruise control in a 2009 Land Rover LR2?

Addressing the non-functioning cruise control in a 2009 Land Rover LR2 is not just a matter of convenience; it is a pressing safety concern that should be prioritized. A malfunctioning cruise control system can lead to erratic acceleration and inaccurate speed readings, which can significantly impair your ability to maintain control of the vehicle. This is particularly critical during long drives where cruise control is often relied upon for comfort and efficiency. Ignoring these symptoms can result in increased driver fatigue and a higher risk of accidents, especially on highways where consistent speed is essential. Additionally, the cost of repairs, typically ranging from $100 to $300, is a small price to pay compared to the potential dangers of driving with a faulty system. Therefore, it is crucial to address any issues with the cruise control promptly to ensure both your safety and the optimal performance of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2009 Land Rover LR2 Cruise Control Issues & Repair Costs