2010 Jeep Grand Cherokee Cruise Control Isn't Working

Fixing Cruise Control Issues in the 2010 Jeep Grand Cherokee

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2010 Jeep Grand Cherokee cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2010 Jeep Grand Cherokee cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the initial diagnostic steps to troubleshoot the non-functional cruise control in a 2010 Jeep Grand Cherokee?

When faced with a non-functional cruise control in your 2010 Jeep Grand Cherokee, it's essential to adopt a systematic diagnostic approach. Begin by checking the cruise control fuse located in the fuse box, as a blown fuse is a common and easily fixable issue. Next, inspect the cruise control buttons on the steering wheel to ensure they are operational; faulty buttons can prevent the system from engaging. Following this, verify the functionality of the vehicle's speed sensors, as these components are crucial for the cruise control to work correctly. If you have access to a diagnostic scanner, use it to check for any error codes that may indicate specific problems within the cruise control system. Additionally, ensure that your brake lights are functioning properly, as non-working brake lights can inhibit cruise control activation. Lastly, for older models, inspect the vacuum lines for any leaks or damage, as these can also lead to cruise control malfunctions. By methodically following these steps, you can effectively diagnose and potentially resolve the issue with your cruise control system.

What are the common problems that could cause the cruise control to stop working in a 2010 Jeep Grand Cherokee?

When troubleshooting cruise control issues in a 2010 Jeep Grand Cherokee, it's essential to consider several common problems that could be at play. One of the primary culprits is a faulty brake light switch, which can prevent the cruise control from engaging since the system is designed to deactivate when the brake pedal is pressed. Additionally, issues with the speed sensor can disrupt the cruise control's functionality, as it relies on accurate speed readings to maintain the desired speed. A blown fuse in the cruise control system can also lead to a complete failure, necessitating a simple fuse replacement to restore operation. Furthermore, vacuum leaks in the engine can hinder the system's ability to maintain speed, while a malfunctioning cruise control module may require repair or replacement. By systematically addressing these potential issues, you can effectively diagnose and resolve cruise control problems in your Jeep, ensuring a smoother driving experience.

How urgent is it to address the non-functioning cruise control in a 2010 Jeep Grand Cherokee?

Addressing the non-functioning cruise control in a 2010 Jeep Grand Cherokee should be considered a priority, as neglecting this issue can lead to several complications that affect both comfort and safety. While it may not seem like an immediate emergency, the inability to maintain a consistent speed can result in driver fatigue during long trips, increasing the risk of accidents. Furthermore, the malfunctioning cruise control could be a symptom of deeper issues within the vehicle's electronic control systems, which, if left unresolved, might lead to more significant and costly repairs down the line. Additionally, without the efficiency of cruise control, fuel consumption may rise, impacting your overall driving costs. Therefore, it is advisable to investigate and resolve any cruise control problems promptly to ensure a safe and enjoyable driving experience.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.