1995 Jeep Cherokee Window Won't Go Up Or Down

Troubleshooting Common Causes for Window Malfunctions in Your 1995 Jeep Cherokee and How to Fix Them

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
36% chance it's the
Fuse, Relay or Electrical System
0%
20% chance it's the
Window Motor
0%
24% chance it's the
Window Regulator
0%
20% chance it's
Something else
The most common reasons a 1995 Jeep Cherokee window won't go up or down are window's electrical system such as a fuse or relay, a broken window motor, or a broken window regulator.
  • Fuse, Relay or Electrical System: A blown fuse or a faulty relay can disrupt the electrical circuit, causing components to fail or operate intermittently.
  • Window Motor: A faulty window motor or a broken window regulator can prevent the window from moving up or down properly.
  • Window Regulator: A faulty window regulator can cause the window to become stuck or operate erratically due to worn gears or a broken cable.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 1995 Jeep Cherokee window won't go up or down?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If one of the windows in a vehicle will not open or close properly, a failing door window regulator might be the cause. A window that is moving intermittently, or one that gets stuck on the way up or down, could also indicate a broken regulator. Other symptoms might include a clicking, chattering, or grinding noise when the window moves. In some cases a severely damaged window regulator could cause the window to drop inside the door.

When a switch can not make contact and close the circuit, the window cannot be raised and lowered. If the switch on the driver's door will not raise or lower the window in question, but the switch on the corresponding door works just fine, this is a good indication that there is a switch failure. This works the other way around, as well. If the switch on the door does not cause the window to function, but the driver's switch does, that is an indication of a passenger door window switch failure.

Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.

Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.

What are the steps to diagnose a window that won't operate in a 1995 Jeep Cherokee?

When diagnosing a window that won't operate in a 1995 Jeep Cherokee, it's crucial to follow a structured diagnostic approach that prioritizes simpler fixes before delving into more complex issues. Begin by checking the fuse related to the power windows, as a blown fuse is a frequent and easily rectifiable problem. If the fuse is intact, proceed to test the window switch to ensure it is functioning properly; a defective switch can prevent the window from operating. Should the switch be operational, inspect the wiring connected to the window motor for any signs of damage or wear, as faulty wiring can disrupt the power supply. Additionally, examine the window motor itself to verify it is receiving power when the switch is activated; if it is not, the issue may stem from the wiring or the switch. Another common issue could be a lack of lubrication in the window tracks, which can cause the window to become stuck; applying lubricant can often restore smooth operation. Lastly, assess the window regulator, as a malfunctioning regulator can impede the window's movement. By systematically following these steps, you can effectively diagnose and resolve the issue with your Jeep's window.

What are the common problems that could cause the window in a 1995 Jeep Cherokee to stop working?

When dealing with a window that has stopped working in a 1995 Jeep Cherokee, it's essential to consider several common problems that could be at play. One of the primary culprits is a faulty window regulator, which is responsible for the movement of the window; if it fails, the window will remain stationary. Another potential issue is a defective window motor, which powers the window's movement; if this component malfunctions, the window will not respond to the switch. Additionally, electrical issues such as a blown fuse or damaged wiring can disrupt the window's operation, making it crucial to inspect the vehicle's electrical system. A malfunctioning window switch may also prevent the window from moving, as it may not be sending the correct signals. Lastly, if the window has come off its track, it can become stuck, requiring realignment to restore functionality. By systematically diagnosing these issues, DIYers can effectively identify and resolve the problem, ensuring their Jeep's windows operate smoothly once again.

How urgent is it to repair the non-functioning window in a 1995 Jeep Cherokee?

Repairing the non-functioning window in your 1995 Jeep Cherokee is not just a matter of convenience; it is a pressing safety concern that requires immediate attention. A malfunctioning window can leave your vehicle vulnerable to theft, as it compromises the security of your belongings. Additionally, exposure to rain or snow can lead to significant interior damage, affecting upholstery and electronic components, which can be costly to repair. Moreover, functional windows are essential for maintaining visibility while driving; a blocked view can increase the risk of accidents. In emergency situations, the inability to quickly open a window can hinder your escape, posing a serious safety hazard. Therefore, addressing this issue promptly is crucial to ensure the safety, security, and overall functionality of your Jeep Cherokee.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.