2007 Hyundai Tiburon Has A Check Engine Light

Troubleshooting the Check Engine Light in Your 2007 Hyundai Tiburon: Common Causes and Solutions

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Emissions System
0%
60% chance it's
Something else
The most common reasons a 2007 Hyundai Tiburon has a check engine light are an emissions system component, a sensor, or a catalytic converter.
  • Emissions System: A faulty emissions system component, such as an oxygen sensor or EGR valve, can lead to increased emissions and trigger the check engine light.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2007 Hyundai Tiburon has a check engine light?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

A faulty oxygen sensor is one of the most common causes of a check engine light. Symptoms may include a decrease in fuel mileage, hesitation or misfiring from the engine, rough idling or even stalling. A faulty sensor may cause the vehicle to fail an emissions test.

Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.

Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.

Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.

When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.

What common issues trigger the check engine light in a 2007 Hyundai Tiburon?

When the check engine light illuminates in a 2007 Hyundai Tiburon, it can be a source of concern for any DIY car owner. One of the most frequent culprits is a faulty oxygen sensor, which plays a crucial role in monitoring the exhaust gases and ensuring optimal engine performance. Another simple yet often overlooked issue is a loose gas cap; if it’s not secured properly, it can lead to fuel vapor leaks and trigger the light. Additionally, if the light is flashing, it may indicate a catalyst damaging misfire, which requires immediate attention to prevent damage to the catalytic converter. Regular maintenance is essential, as neglecting timing belt issues can lead to severe engine complications that also activate the check engine light. Lastly, problems with the fuel pump can affect the vehicle's starting and running capabilities, making it another potential reason for the warning light. Addressing these issues promptly not only helps in keeping the vehicle running smoothly but also prevents further damage, making it crucial for DIY enthusiasts to stay vigilant.

What are the first steps to diagnose the check engine light on a 2007 Hyundai Tiburon?

To effectively diagnose the check engine light on your 2007 Hyundai Tiburon, begin with the simplest and most common issue: the gas cap. A loose or damaged gas cap can trigger the check engine light, so make sure it is securely tightened. If the gas cap is in good condition, the next step is to inspect the oxygen sensor for any visible damage or wear, as this component plays a crucial role in your vehicle's emissions system. If these initial checks do not resolve the issue, it’s time to utilize a diagnostic tool. Connect the scanner to the OBD2 port, restart the ignition, and follow the scanner's instructions to read the trouble codes. This will provide you with specific information about what might be causing the check engine light to illuminate, allowing you to take informed steps towards a solution. By following this structured approach, you can efficiently diagnose and address the check engine light issue in your Tiburon.

How urgent is it to address the check engine light in a 2007 Hyundai Tiburon?

When the check engine light comes on in your 2007 Hyundai Tiburon, it is crucial to take immediate action. This warning light can signify a range of issues, from minor concerns like a loose gas cap to more serious problems involving the oxygen sensor or catalytic converter. Ignoring the light can lead to significant damage over time, resulting in costly repairs and potentially compromising your vehicle's safety and performance. A steady light may indicate a less urgent issue, but a blinking light often signals a severe problem that requires immediate attention. By addressing the check engine light promptly, you not only safeguard your vehicle's longevity but also ensure a safer driving experience. Therefore, it is advisable to diagnose and resolve the underlying issue as soon as possible to avoid further complications.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.