The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose and resolve the tire pressure light issue on your 2013 Hyundai Sonata, begin by checking the tire pressure to ensure all tires are inflated to the recommended levels, which can be found on the tire information placard or in your owner's manual. It's crucial to perform this check when the tires are cold for the most accurate reading. If the tire pressures are correct, the next step is to reset the Tire Pressure Monitoring System (TPMS). This can be done by driving at a speed of at least 50 mph for about 10 minutes, allowing the system to recalibrate, or by using the TPMS reset button if your model is equipped with one. If these methods do not resolve the issue, consider overinflating the tires slightly, then completely deflating them before reinflating to the recommended pressure, followed by a short drive to help the system recalibrate. If the light persists, using an OBD scanner can help identify specific error codes related to the TPMS, which may indicate sensor issues. A flashing TPMS light at startup could suggest a faulty sensor that may need replacement. If all else fails, consulting a professional mechanic or a Hyundai dealership is advisable, as they possess the specialized tools necessary for a thorough diagnosis and repair. By following this systematic approach, you can effectively address the tire pressure light issue and ensure your vehicle remains safe and roadworthy.
When the tire pressure light stays on in your 2013 Hyundai Sonata, it can be frustrating, especially after you've checked the tire pressures. One common issue is low tire pressure, which can occur if the tires are not inflated to the recommended levels, particularly after temperature fluctuations. It's essential to check the tire pressures when the tires are cold to ensure accuracy. Another potential problem could be faulty TPMS sensors, which may malfunction or have dead batteries, especially if they are older than five years. If the light persists despite correct tire pressures, consider the possibility of using an inaccurate pressure gauge, as this can lead to misleading readings. Additionally, external radio frequency interference might disrupt the TPMS signal, causing the light to remain on. In some cases, the TPMS system may simply need a reset, which can be done by following specific steps in your vehicle's manual. Lastly, don’t forget to check the spare tire's pressure if it is equipped with a TPMS sensor, as neglecting this can also trigger the warning light. By systematically addressing these common problems, you can effectively troubleshoot and resolve the issue with your tire pressure light.
Addressing the tire pressure light issue in your 2013 Hyundai Sonata is crucial for maintaining both safety and vehicle performance. Ignoring this warning can lead to dangerous driving conditions, as underinflated tires significantly increase the risk of tire failure and compromise handling. Additionally, properly inflated tires are essential for optimal fuel efficiency; neglecting tire pressure can result in decreased mileage and overall performance. If the tire pressure light remains illuminated after checking your tire pressures, it may indicate a malfunctioning sensor, which could lead to more extensive repairs if not addressed promptly. By taking immediate action to check and adjust your tire pressures, and seeking professional assistance if the light persists, you can ensure your vehicle operates safely and efficiently while preventing potential damage to the tire pressure monitoring system.
Read about related problems experienced by other Hyundai Sonata drivers like you.
See what others are asking about their Hyundai Sonata. Get answers from RepairPal's community of auto experts and enthusiasts.
