2008 Hyundai Accent Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2008 Hyundai Accent and How to Fix Them

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2008 Hyundai Accent cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty sensor can lead to incorrect readings, causing issues with engine performance or triggering warning lights on the dashboard.
  • Control Module: A faulty control module can result in erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent acceleration and poor engine response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2008 Hyundai Accent cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.

Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.

What are the steps to diagnose the cruise control issue in a 2008 Hyundai Accent?

To effectively diagnose a cruise control issue in your 2008 Hyundai Accent, begin with a systematic approach that prioritizes simpler checks before delving into more complex diagnostics. Start by inspecting the fuse box for any blown fuses related to the cruise control system, as this is a common and easily fixable problem that can disrupt power to critical components. Next, examine the control module, speed sensor, and throttle for any signs of failure, as these are frequent culprits in cruise control malfunctions. Testing the cruise control buttons is also essential; ensure they respond correctly, particularly the set button, which is vital for engaging the system. If you notice intermittent functionality, it may indicate deeper issues, so consider the brake pedal switch, which can affect the cruise control if it fails. Lastly, remember to assess environmental factors, as using cruise control in unsuitable conditions can lead to performance issues. By following this structured diagnostic approach, you can efficiently identify and address the root cause of your cruise control problems.

What common issues cause cruise control failure in a 2008 Hyundai Accent?

When dealing with cruise control failure in a 2008 Hyundai Accent, it's essential to understand the common problems that may be at play. One frequent culprit is a malfunctioning cruise control switch, which can wear out over time and fail to properly engage the Cruise Control Module (CCM). This can lead to the cruise control system being completely inoperative or only partially functional. Additionally, electrical issues such as a blown fuse can disrupt the cruise control system's operation, as the system relies on a specific fuse to function correctly. Another area to investigate is the vehicle's sensors, particularly the throttle position sensor, which can hinder the cruise control from engaging if it malfunctions. Lastly, the control module itself may experience failures that prevent the cruise control from working as intended. For those looking to tackle these issues themselves, it's advisable to start by checking the cruise control switch and fuses, followed by inspecting the relevant sensors and control module for any signs of damage or malfunction.

How urgent is it to address the non-functioning cruise control in a 2008 Hyundai Accent?

When it comes to the non-functioning cruise control in a 2008 Hyundai Accent, understanding the urgency of the situation is crucial for both safety and driving comfort. While it may not seem like an immediate emergency, neglecting this issue can lead to increased driver fatigue during long trips, as the cruise control system is designed to alleviate the strain of constant speed regulation. Additionally, the malfunction could stem from various underlying problems, such as a blown fuse, a faulty brake switch, or even issues with the speed sensor or wiring. These components are integral to the cruise control system's operation, and overlooking them could result in more significant repairs down the line. For DIY enthusiasts, starting with a simple fuse check is a practical first step, as it is one of the most common causes of cruise control failure. However, if the problem persists, it may indicate more complex issues, such as a defective brake pedal switch or problems with the Body Control Module, which may require specialized diagnostic tools. Therefore, while the cruise control issue may not pose an immediate threat, addressing it promptly can enhance your driving experience and prevent potential safety risks on the road.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.