how to change the bulbs

You access them from behind the bulb assembly and the plugs turn and then pull out. Once you have the connector out just pull out the old bulb and replace(you may not be able to get skin oil on it so check the package and use a glove if you have to).

It is not necessary to remove the entire grill, just the chrome trim piece that extends across both head lights. Use a small flat screwdriver and delicately pry the trim piece towards you. It is held in place by several small plastic tabs that are located across the entire back side of the trim piece. Be VERY careful in doing this as the chrome piece is very brittle & easily broken or damaged. Once you have the trim removed, you will need to remove 3 bolts that retain the headlight assembly and one press-in tab. The bolts have 10mm heads. Two are located on the top of the assembly, one on the lower corner. After removing the 3 bolts, pull the headlight forward to dislodge the lower retaining tab which is on the opposite side of the headlight housing from the lower bolt toward the rear of the housing. Once you have the assembly out, accessing the bulb is simple! This is not the easiest job to do, so it is a good idea to take painter's tape & protect the paint on the bumper & fender as well as the clear, Lexan part of the headlight assembly. Take your time, be careful, & you will get it right the first time!