how do i replace the thermostat?

Thermostat Replacement (4.2L Engine) Tools Required * J 38185 Hose Clamp Pliers Removal Procedure 1. Remove the necessary coolant from the radiator. 2. Remove the generator. 3. Loosen the outlet hose clamp at the thermostat housing (1). Remove the outlet hose from the thermostat housing. 4. Remove the thermostat housing bolts. 5. Remove the thermostat housing from the engine block. 6. Clean all of the surfaces of the thermostat housing. 7. Clean the sealing surface of the engine block. Installation Procedure 1. Install the thermostat housing at the water inlet to the engine block. NOTICE: Refer to Fastener Notice in Service Precautions. See: Service Precautions\Vehicle Damage Warnings\Fastener Notice 2. Install the thermostat housing bolts. Tighten the bolts to 10 Nm (89 inch lbs.). 3. Lubricate the inner diameter of the radiator hose with engine coolant. 4. Install the outlet hose to the thermostat housing (1). Secure the hose with the clamp. 5. Install the generator. 6. Fill the cooling system with specified coolant and concentration. 7. Inspect all sealing surfaces for leaks after starting the engine.

you need to remove the fan blade, remove the serpentine belt and then remove the alternator assembly. you will see the housing. the thermostat replacement will include the entire housing. it is tight, just take your time. Roy