2011 Honda Fit Window Won't Go Up Or Down

Troubleshooting Common Issues with Your 2011 Honda Fit's Power Windows and Effective Fixes

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
36% chance it's the
Fuse, Relay or Electrical System
0%
20% chance it's the
Window Motor
0%
24% chance it's the
Window Regulator
0%
20% chance it's
Something else
The most common reasons a 2011 Honda Fit window won't go up or down are window's electrical system such as a fuse or relay, a broken window motor, or a broken window regulator.
  • Fuse, Relay or Electrical System: A blown fuse or a faulty relay can disrupt the electrical circuit, causing components to fail or operate intermittently.
  • Window Motor: A faulty window motor or a broken window regulator can prevent the window from moving up or down properly.
  • Window Regulator: A faulty window regulator can cause the window to become stuck or operate erratically due to worn gears or a broken cable.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2011 Honda Fit window won't go up or down?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If one of the windows in a vehicle will not open or close properly, a failing door window regulator might be the cause. A window that is moving intermittently, or one that gets stuck on the way up or down, could also indicate a broken regulator. Other symptoms might include a clicking, chattering, or grinding noise when the window moves. In some cases a severely damaged window regulator could cause the window to drop inside the door.

When a switch can not make contact and close the circuit, the window cannot be raised and lowered. If the switch on the driver's door will not raise or lower the window in question, but the switch on the corresponding door works just fine, this is a good indication that there is a switch failure. This works the other way around, as well. If the switch on the door does not cause the window to function, but the driver's switch does, that is an indication of a passenger door window switch failure.

Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.

Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.

What are the steps to diagnose a non-functioning window in a 2011 Honda Fit?

To effectively diagnose a non-functioning window in your 2011 Honda Fit, start with the simplest solutions before delving into more complex issues. Begin by testing the window switch, as a faulty switch is often the culprit behind window malfunctions. If the switch appears to be working, proceed to inspect the fuse box for any blown fuses related to the window system, replacing any that are damaged with fuses of the same amperage. Next, examine the wiring connected to the window motor for any signs of damage or loose connections, as these can disrupt power flow. If the wiring checks out, use a multimeter to test the window motor for power and ground; if the motor isn't receiving power, the issue may lie with the wiring or switch. Finally, if all previous components are functioning correctly, inspect the window regulator for any signs of wear or damage, as a faulty regulator may require replacement. By following this structured approach, you can systematically identify and resolve the issue with your window, ensuring a smoother DIY repair process.

What are the common problems that could cause the window in a 2011 Honda Fit to stop working?

When dealing with a non-functioning window in a 2011 Honda Fit, it's essential to understand the common problems that could be at play. One of the primary culprits is a faulty window regulator, which is responsible for the window's movement; if it fails, the window may become stuck. Additionally, issues with the power window switch can prevent the window from operating, as a damaged switch may not send the necessary signals to the window motor. Another frequent issue is a blown fuse, which can interrupt the power supply to the window motor, making it essential to check and replace any blown fuses. If the window motor itself has failed, it will not respond to commands from the switch, leading to a complete loss of function. Wiring problems, such as damaged or corroded connections, can also disrupt the electrical flow needed for the window to operate. Lastly, if the window has come off its track, it may require realignment or repairs to restore its functionality. By identifying and addressing these common issues, you can effectively troubleshoot and potentially fix the window problem in your Honda Fit.

How urgent is it to address the malfunctioning window in my 2011 Honda Fit?

Addressing a malfunctioning window in your 2011 Honda Fit is not just a matter of convenience; it is a pressing safety concern that requires immediate attention. A window that fails to operate properly can leave your vehicle vulnerable to theft, as an open window compromises security. Additionally, exposure to the elements can lead to significant interior damage, including mold growth and electrical issues, which can be costly to repair. Furthermore, a malfunctioning window can obstruct your view while driving, increasing the risk of accidents and endangering both you and other road users. Lastly, neglecting this issue can adversely affect your vehicle's resale value, as potential buyers are likely to be deterred by visible defects. Therefore, it is crucial to prioritize the repair of your window to ensure your safety, protect your investment, and maintain the overall functionality of your Honda Fit.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2011 Honda Fit Window Issues: Causes & Repair Costs