The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2012 Honda Crosstour, begin with the simplest and most straightforward approach. Start by checking the tire pressure in all four tires using a reliable tire pressure gauge, ensuring they are inflated to the levels recommended in your owner's manual. This initial step can often resolve the warning light if the tires are under-inflated. Next, conduct a thorough inspection of each tire for any visible damage, such as punctures, cuts, or bulges, and remove any debris lodged in the treads that could be causing a slow leak. If the tire pressure is correct and the tires appear undamaged, the next step is to reset the tire pressure monitoring system (TPMS), as sometimes the system may require a reset to clear the warning light. Refer to your vehicle's manual for specific instructions on how to perform this reset. If the warning light remains illuminated after these steps, it may indicate a more complex issue, such as a faulty sensor or other underlying problems, at which point consulting a mechanic or dealership for a professional diagnosis is advisable. By following this diagnostic approach, you can systematically address the tire pressure warning light issue and ensure your vehicle is safe to drive.
When the tire pressure warning light remains illuminated in a 2012 Honda Crosstour, it often points to several common issues that can be addressed through DIY methods. One frequent culprit is a malfunction or damage to the tire pressure monitoring system (TPMS) sensors, which can prevent accurate readings from being transmitted. Additionally, if the TPMS sensor battery is dead or the receiver is damaged, the warning light may stay on, indicating a need for replacement. For vehicles equipped with an indirect TPMS, a drop in tire pressure in one or more tires can trigger the warning light, making it essential to check and inflate tires to the recommended levels. If the tires are properly inflated and the light persists, a reset of the TPMS system may be necessary, which can often be done using the vehicle's onboard settings or a specialized tool. Ignoring the warning light is not advisable, as it can lead to unsafe driving conditions due to potential tire failure. By understanding these common problems, DIYers can take proactive steps to diagnose and resolve the issue, ensuring their vehicle remains safe and roadworthy.
Addressing the tire pressure warning light that remains illuminated in your 2012 Honda Crosstour is crucial for several reasons. First and foremost, low tire pressure can significantly compromise your vehicle's handling and braking capabilities, which poses a serious safety risk, particularly in challenging driving conditions. Additionally, driving on underinflated tires can lead to uneven wear, shortening their lifespan and increasing the likelihood of a blowout, which could result in dangerous situations on the road. Furthermore, neglecting this warning can negatively impact your fuel efficiency, leading to higher fuel costs over time due to increased consumption. Lastly, the tire pressure monitoring system (TPMS) is designed to alert you to potential tire issues, and ignoring this warning could indicate a malfunction within the system itself. Therefore, it is imperative to check and adjust your tire pressure promptly or consult a professional if the warning light persists, ensuring both your safety and the longevity of your vehicle.
Read about related problems experienced by other Honda Crosstour drivers like you.
See what others are asking about their Honda Crosstour. Get answers from RepairPal's community of auto experts and enthusiasts.