2013 Honda CR-Z Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2013 Honda CR-Z and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2013 Honda CR-Z cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Honda CR-Z cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the cruise control issue in a 2013 Honda CR-Z?

To effectively diagnose a cruise control issue in a 2013 Honda CR-Z, it's essential to adopt a systematic approach that begins with the simplest potential problems before progressing to more complex diagnostics. Start by checking the cruise control fuse, as a blown fuse can easily disrupt the system's functionality. Next, inspect the cruise control buttons on the steering wheel to ensure they are operational, since faulty buttons can lead to engagement issues. Utilizing an OBD-II scanner to scan for error codes is a crucial step, as these codes can reveal underlying problems within the cruise control system. Following this, verify the functionality of the vehicle's speed sensors, which are vital for the cruise control to operate correctly. Additionally, check the brake lights and the brake light switch, as any malfunction here can prevent the cruise control from engaging. Finally, inspect the vacuum lines connected to the cruise control actuator for any leaks or damage, as compromised vacuum lines can significantly affect performance. By methodically following these steps, you can accurately diagnose and address the cruise control issue in your Honda CR-Z.

What are the common problems that could cause the cruise control to stop working in a 2013 Honda CR-Z?

When troubleshooting the cruise control system in a 2013 Honda CR-Z, it's essential to consider several common issues that may be at play. One of the first components to check is the brake pedal switch, as a faulty switch can prevent the cruise control from engaging, since it is designed to deactivate when the brake is pressed. Additionally, inspect the fuses related to the cruise control system; a blown fuse can disrupt its functionality entirely. Another critical area to examine is the speed sensor, which is responsible for maintaining a consistent speed; any malfunction here can lead to cruise control failure. Furthermore, the throttle actuator, which adjusts the engine's throttle, may also be malfunctioning, impacting the cruise control's ability to operate correctly. Lastly, consider the electronic control module (ECM), as issues within this computer can affect various vehicle functions, including cruise control. By systematically checking these components, DIYers can often identify and resolve the issue without needing to consult a mechanic.

How urgent is it to address the malfunctioning cruise control in my 2013 Honda CR-Z?

Addressing the malfunctioning cruise control in your 2013 Honda CR-Z is crucial for several reasons. First and foremost, a malfunctioning system can lead to unexpected acceleration or deceleration, significantly increasing the risk of accidents on the road. This safety concern is compounded during long drives or highway journeys, where consistent speed is essential for comfort and control. Additionally, ignoring the issue can result in higher fuel consumption, as the vehicle struggles to maintain a steady speed, ultimately affecting your wallet. Furthermore, delaying repairs may lead to more extensive damage to the vehicle's systems, resulting in costly repairs down the line. Therefore, it is imperative to prioritize fixing your cruise control to ensure not only your safety but also the longevity and efficiency of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2013 Honda CR-Z Cruise Control Issues: Causes & Repairs