The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2012 Honda CR-V, start by checking the tire pressure in all four tires using a reliable tire pressure gauge. Ensure that each tire is inflated to the manufacturer's recommended levels, which can be found in your owner's manual. If any tire is under-inflated, inflate it to the correct pressure. Don’t forget to inspect the spare tire as well, even though it lacks a sensor for the Tire Pressure Monitoring System (TPMS); it should still be properly inflated. After adjusting the tire pressures, take your vehicle for a drive at speeds exceeding 28 miles per hour for a few minutes. This allows the TPMS to recalibrate and may resolve any temporary sensor interference. If the warning light remains illuminated after these steps, it could indicate a more complex issue with the TPMS that may require professional diagnosis. In such cases, consulting a qualified mechanic or dealership is advisable to ensure your vehicle's safety and performance.
When the tire pressure warning light remains on in your 2012 Honda CR-V, it can be frustrating, but understanding the common problems can help you diagnose the issue. One of the primary culprits is low tire pressure, which is easily remedied by checking and inflating your tires to the manufacturer's recommended levels. If the pressure is adequate, the problem may lie with a faulty tire pressure sensor, which could require replacement. Additionally, the sensor's battery might be dead, necessitating a battery replacement to restore functionality. In some cases, the tire pressure monitoring system may need recalibration to ensure it provides accurate readings. It's also crucial to inspect your tires for any leaks or punctures, as these can lead to pressure loss and trigger the warning light. Lastly, check for any issues with the wiring or connections related to the tire pressure monitoring system, as damaged or loose connections can also cause the light to stay on. By systematically addressing these potential issues, you can effectively troubleshoot and resolve the tire pressure warning light concern in your vehicle.
Addressing the tire pressure warning light on a 2012 Honda CR-V that remains illuminated is an urgent matter that should not be overlooked. Ignoring this warning can lead to serious safety concerns, as improper tire pressure significantly affects vehicle handling, braking, and overall stability, increasing the risk of accidents. Additionally, driving with incorrect tire pressure accelerates tire wear, which not only shortens the lifespan of your tires but also raises the likelihood of a blowout, potentially leading to costly repairs and dangerous situations. Furthermore, maintaining the correct tire pressure is essential for optimal fuel efficiency; neglecting this can result in higher fuel consumption, impacting your budget over time. For DIY enthusiasts, taking immediate action to check and adjust tire pressure not only enhances safety and performance but also promotes better vehicle maintenance practices. Therefore, it is crucial to address the tire pressure warning light promptly to ensure a safe and efficient driving experience.
Read about related problems experienced by other Honda CR-V drivers like you.
See what others are asking about their Honda CR-V. Get answers from RepairPal's community of auto experts and enthusiasts.
