Having problem with my a/c system

Is the A/C compressor turning on and off/cycling as it should? Is there condensation forming on the accumulator (dryer) under the hood and are the hoses cold after running a while? If the answers to these questions are "yes", you could have an issue with the temperature control and temperature blend doors. Do you have automatic temperature control? If the compressor does not cycle, or cycles quickly, and your accumulator is warm, make sure there is sufficient refrigerant in the system. Check the cycle switch and wiring connector to make sure there is no open circuit there. What was the reason the compressor needed replaced in the first place? If there was contamination in the system from debris, you could have contamination still restricting flow somewhere. I assume you replaced the orifice tube when you replaced the accumulator... Good luck...