The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2019 Ford Explorer, begin by checking the tire pressure in all four tires using a reliable tire pressure gauge. Ensure that each tire is inflated to the recommended levels specified in your vehicle's manual, as improper inflation is a common cause of warning lights. Next, inspect the tires for any visible damage, such as punctures, cuts, or bulges, which could indicate a more serious problem. If the tires appear to be in good condition, consider resetting the tire pressure monitoring system (TPMS) as outlined in your vehicle's manual, since sometimes the system may require a reset after adjustments. After making any necessary changes, take your Explorer for a short drive; this can help the system recalibrate and potentially turn off the warning light. If the light remains illuminated despite these efforts, it may be time to consult a mechanic or dealership for a thorough diagnosis, as there could be an underlying issue with the TPMS sensors that requires professional attention. By following this structured approach, you can efficiently address the tire pressure warning light and ensure your vehicle is safe to drive.
When the tire pressure warning light remains illuminated in a 2019 Ford Explorer, it can be attributed to several common problems that DIYers can investigate. First and foremost, low tire pressure is often the culprit; checking and inflating all tires to the manufacturer’s recommended levels is a straightforward first step. If the pressure is adequate, the issue may lie with a faulty tire pressure sensor, which could require replacement if it fails to provide accurate readings. Additionally, the batteries within the tire pressure sensors can deplete over time, leading to malfunctions that trigger the warning light. Inspecting the wiring and connections associated with the tire pressure monitoring system (TPMS) is also essential, as damaged or loose connections can prevent the system from functioning correctly. In some cases, performing a TPMS reset can recalibrate the system and turn off the warning light, a procedure typically outlined in the vehicle’s manual. Lastly, environmental factors such as extreme temperature changes can affect tire pressure readings, making regular monitoring crucial. By systematically addressing these potential issues, you can effectively troubleshoot the tire pressure warning light in your Ford Explorer and maintain optimal tire health.
Addressing the tire pressure warning light on a 2019 Ford Explorer that remains illuminated is crucial for several reasons. First and foremost, low tire pressure can severely compromise vehicle safety, affecting handling and braking performance, which increases the likelihood of accidents, particularly in critical driving situations. Additionally, driving on underinflated tires can lead to uneven wear, significantly shortening their lifespan and raising the risk of a blowout, which can be both dangerous and costly. Furthermore, neglecting this warning can negatively impact fuel efficiency, leading to higher fuel costs over time. Lastly, the tire pressure monitoring system (TPMS) itself may be malfunctioning, requiring attention to avoid further complications. Therefore, it is essential for DIY enthusiasts to promptly check and address any tire pressure issues to ensure safe driving conditions, prolong tire life, and maintain overall vehicle performance.
Read about related problems experienced by other Ford Explorer drivers like you.
See what others are asking about their Ford Explorer. Get answers from RepairPal's community of auto experts and enthusiasts.
