The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2016 Ford Explorer, begin with a straightforward approach that prioritizes simple checks before moving on to more complex solutions. Start by using a tire pressure gauge to measure the air pressure in all four tires, ensuring they meet the recommended levels outlined in your vehicle's manual. If the pressure is low, inflate the tires accordingly. Next, visually inspect each tire for any signs of damage, such as punctures or bulges, which could indicate a leak or other issues. If the tires appear to be in good condition and properly inflated, consult your vehicle's manual to reset the tire pressure monitoring system (TPMS), as it may require recalibration after adjustments. Additionally, remember to check the spare tire, as its pressure can also affect the warning light. If the light remains illuminated despite these efforts, it may be time to seek professional assistance from a mechanic or dealership for a comprehensive diagnosis. This methodical approach not only helps in identifying the issue but also ensures that you cover all potential causes efficiently.
When the tire pressure warning light stays on in a 2016 Ford Explorer, it can signal several underlying issues that DIYers can troubleshoot. The most common cause is low tire pressure, so the first step is to check and inflate all tires to the recommended levels. If the pressure is adequate, consider the possibility of a faulty tire pressure sensor, which may need replacement if it’s not functioning correctly. Another potential issue is the need for recalibration of the tire pressure monitoring system, a task that can often be completed by following the vehicle's manual. Additionally, inspect the vehicle's electrical components for any wiring problems or blown fuses that could be causing the warning light to remain illuminated. In some cases, a malfunctioning control module may be responsible, which could require professional help to replace. Lastly, be aware that extreme temperature fluctuations can impact tire pressure readings, leading to false alerts. By methodically addressing these common problems, you can effectively diagnose and resolve the tire pressure warning light issue, ensuring your vehicle remains safe and reliable.
Addressing the tire pressure warning light on a 2016 Ford Explorer is crucial for maintaining both safety and vehicle performance. Ignoring this warning can lead to serious safety concerns, as low tire pressure significantly impacts handling and braking, increasing the likelihood of accidents. Additionally, driving on underinflated tires accelerates uneven wear, which not only shortens the lifespan of your tires but also necessitates costly replacements sooner than expected. Furthermore, low tire pressure can adversely affect fuel efficiency, leading to higher fuel costs over time. The risk of tire damage, including potential blowouts, is another critical factor; continued driving with insufficient tire pressure can compromise tire integrity. Therefore, it is essential to check and inflate your tires to the recommended levels as soon as the warning light remains illuminated. If the light persists despite proper inflation, it may signal a deeper issue that requires professional attention, underscoring the urgency of addressing this warning promptly.
Read about related problems experienced by other Ford Explorer drivers like you.
See what others are asking about their Ford Explorer. Get answers from RepairPal's community of auto experts and enthusiasts.