The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
When diagnosing the tire pressure warning light issue on your 2013 Ford Explorer, it's essential to adopt a systematic approach that begins with the simplest solutions. Start by checking the tire pressure in all four tires using a reliable tire pressure gauge, ensuring they are inflated to the levels recommended in your vehicle's manual. This initial step can often resolve the warning light if the pressure is low. Next, inspect the tires for any visible damage, such as punctures or bulges, which could indicate a leak or other issues. If the tires appear to be in good condition, proceed to reset the tire pressure monitoring system according to the instructions in your manual, as this can clear any false alerts. Additionally, examine the valve stems for signs of wear or leaks, as faulty stems can disrupt the monitoring system. If these steps do not resolve the issue, it may be time to consult a mechanic or dealership for a professional diagnosis, ensuring that any underlying problems are addressed effectively. By following this diagnostic approach, you can efficiently troubleshoot the tire pressure warning light and maintain the safety and performance of your vehicle.
When the tire pressure warning light remains illuminated in a 2013 Ford Explorer, it often indicates underlying issues that require attention. One of the most frequent culprits is a faulty Tire Pressure Monitoring System (TPMS) sensor, which may need replacement or recalibration. Additionally, if the sensors were incorrectly installed during a previous tire change, this could also trigger the warning light. It's essential to check the tire pressure itself, as low levels can easily cause the light to stay on; ensuring that all tires are inflated to the manufacturer's recommended pressure is a straightforward DIY task. If the tire pressure is nearing a critical low threshold, the TPMS light may flash, signaling an urgent need for action. Lastly, malfunctioning sensors can lead to persistent warning lights, necessitating a diagnostic check to pinpoint the exact issue. Addressing these problems promptly not only ensures safety but also maintains the proper functioning of the vehicle's tire monitoring system.
Addressing the tire pressure warning light that remains illuminated in your 2013 Ford Explorer is an urgent matter that should not be overlooked. Ignoring this warning can lead to serious safety concerns, including reduced traction and an increased risk of tire blowouts, which can jeopardize your safety on the road. Additionally, driving with improper tire pressure can cause uneven tire wear, resulting in premature tire damage and costly replacements. This not only affects your wallet but also compromises your vehicle's performance. Furthermore, incorrect tire pressure can negatively impact fuel efficiency, leading to higher fuel costs over time. Properly inflated tires are essential for maintaining optimal vehicle handling and stability, ensuring a smoother and safer driving experience. Therefore, it is crucial to check your tire pressure regularly, inflate your tires to the recommended levels, and address any underlying issues with the tire pressure monitoring system to safeguard your vehicle and enhance its longevity.
Read about related problems experienced by other Ford Explorer drivers like you.
See what others are asking about their Ford Explorer. Get answers from RepairPal's community of auto experts and enthusiasts.
