The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.
When troubleshooting cruise control issues in a Ford Explorer Sport Trac, it's essential to adopt a methodical diagnostic approach. Begin by checking the fuse associated with the cruise control system; even if it appears intact, replacing it can eliminate potential electrical issues. Next, inspect the control module and sensor, as malfunctions in these components can disrupt cruise control functionality. Pay attention to the throttle as well, since any faults here can also lead to problems. If these initial checks do not resolve the issue, consider examining the clockspring, which is vital for the cruise control system's operation. Additionally, assess the cruise control switches and wiring harness for any signs of damage or malfunction. Finally, don't overlook the brake pressure switch or sensor, located atop the brake master cylinder, as this can significantly impact cruise control performance. By following this structured approach, you can effectively identify and address the root cause of cruise control issues in your vehicle.
When troubleshooting cruise control issues in a Ford Explorer Sport Trac, it's essential to understand the common problems that may arise. Start by checking the fuse under the hood, as a blown fuse can often be the culprit behind a non-functioning system. Even if the fuse appears intact, replacing it can sometimes resolve the issue. If the problem persists, consider the clockspring, a critical component that can fail and disrupt cruise control functionality. Replacing the clockspring with a compatible part designed for your model year can restore proper operation. Additionally, inspect the cruise control switches and wiring harness; broken buttons or faulty connections can prevent the system from engaging. Another vital component to examine is the cruise control pressure brake switch, located on top of the brake master cylinder. Testing this switch for continuity can help determine if it is functioning correctly. Lastly, if the cruise control is not engaging, ensure you are following the correct activation process by pressing the "on" button followed by the "set" button. If you only see a blink on the instrument cluster, further investigation into the engagement mechanism may be necessary. By systematically addressing these common issues, you can effectively troubleshoot and potentially resolve cruise control problems in your Ford Explorer Sport Trac.
When the cruise control in your Ford Explorer Sport Trac fails, it’s crucial to act quickly, as neglecting the issue can lead to safety risks and potentially more significant vehicle damage. Common culprits include a malfunctioning control module, faulty sensors, or defective switches, all of which can disrupt the cruise control functionality. Additionally, problems with throttle actuation or a defective brake pedal position switch can also contribute to the malfunction. If you notice symptoms like black exhaust, it may indicate a failing throttle position sensor, which can further complicate the issue by affecting fuel delivery. To ensure your safety and the proper functioning of your vehicle, it’s advisable to diagnose these components promptly. By addressing these issues early, you can avoid more extensive repairs and maintain the reliability of your Ford Explorer Sport Trac.
Read about related problems experienced by other Ford Explorer Sport Trac drivers like you.
See what others are asking about their Ford Explorer Sport Trac. Get answers from RepairPal's community of auto experts and enthusiasts.
