Learn About Your Car

Are you interested in certification?

Ignition Lock Cylinder Replacement

What is an ignition lock cylinder?

The ignition lock cylinder and ignition switch are two separate components. The lock cylinder is the portion that the key slides into and allows the ignition to turn. This is one of your vehicle's defenses against theft.

How does the ignition lock cylinder work?

If the correct key is inserted, small actuators on the lock cylinder will allow it and ignition switch to rotate.

A broken ignition lock can make it difficult to turn the key.

A failed ignition switch can cause the engine to run even after the key has been removed from the ignition.

Sometimes when there is a problem with the ignition switch, the steering wheel is difficult to lock or unlock.

What are the symptoms related to a bad ignition lock cylinder?

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it's possible the ignition will turn and run with the key removed, or lets the key be removed in any position. Lastly, the lock can fail to release your key, or not allow the key to travel all the way into the ignition lock cylinder.

Toyota Ignition Lock Cylinder Replacement Cost Estimates

The average cost for a Ignition Lock Cylinder Replacement is between $400 and $452 but can vary from car to car.

Toyota Sequoia Ignition Lock Cylinder Replacement Cost by Year

The average cost for a Toyota Sequoia Ignition Lock Cylinder Replacement is between $400 and $452 but can vary from car to car.

Show All Years

Disclaimer

Materials Included Under License from Toyota Motor Sales, U.S.A., Inc. License Agreement TMS1008. All information contained in any materials obtained about Toyota, Lexus, and Scion vehicles is based on the latest product information available at the time of publication, is provided “as is” without warranty of any kind, and is intended for service providers and other interested parties in Canada, Mexico, and the United States of America, including Guam, Puerto Rico, and the U.S. Virgin Islands. Specifications and procedures are subject to change without notice. This information is provided expressly for the purpose of use by professional automobile technicians who have special techniques and certifications. Repair or service by non-specialized or uncertified technicians using only this information, or without proper equipment or tools, may cause severe injury to the individual or other individuals and could possibly cause damage to the vehicle. Certain procedures or content elements may make reference to Toyota Warranty policy or practice – these policies or practices are only applicable to Toyota, Lexus, or Scion dealers.

More RepairPal Resources

Ignition Lock Cylinder Replacement

Jump to:Commonly associated repairs Cost estimates by vehicle Cost estimates by year

What is an ignition lock cylinder?

How does the ignition lock cylinder work?

If the correct key is inserted, small actuators on the lock cylinder will allow it and ignition switch to rotate.

A broken ignition lock can make it difficult to turn the key.

A failed ignition switch can cause the engine to run even after the key has been removed from the ignition.

Sometimes when there is a problem with the ignition switch, the steering wheel is difficult to lock or unlock.

What are the symptoms related to a bad ignition lock cylinder?

2011 Toyota Sequoia Ignition Lock Cylinder Replacement Cost

The average cost for a 2011 Toyota Sequoia Ignition Lock Cylinder Replacement is between $400 and $452.

Labor costs are estimated between $110 and $161 while parts are typically priced around $291.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.

Can I drive with an ignition lock cylinder problem?

When the ignition lock cylinder is malfunctioning, it may be impossible to insert the key, turn the ignition, or remove the key from the ignition. If the key won't go in or turn, you won't be able to drive the car, obviously. If the key won't come out, theft is a major concern. Either way, you'll want this fixed quickly.

How often do ignition lock cylinders need to be replaced?

Theres no set maintenance routine for the ignition lock cylinder. Lock cylinders fail somewhat commonly, but mostly for higher-mileage vehicles. Most vehicles will never need the lock cylinder replaced. You can help yours last by cleaning your ignition key, making sure there's no lint on it before putting it in the ignition, and keeping your keychain fairly light, so as not to put added pressure on the cylinder while you drive.

How are ignition lock cylinder issues diagnosed?

If the ignition key stops working, or won't come out of the cylinder, the ignition lock cylinder is usually the culprit. A mechanic can confirm it's the problem after disassembling it.

How is an ignition lock cylinder replaced?

In most cases, the steering column plastic covers will be removed, and the ignition lock cylinder will be turned and released. A new cylinder will be installed, which usually will come with a new key.

Get a RepairPal Fair Price Estimate® for your 2011 Toyota Sequoia.

Our Fair Price Estimate will help you avoid overpaying based on your car, needed service, and labor rates in your area.