Estimates last updated October 16, 2025

2011 Jeep Wrangler Fuel Injector Replacement Cost

The average cost for a 2011 Jeep Wrangler Fuel Injector Replacement is between $302 and $376.

Labor costs are estimated between $159 and $233 while parts are typically priced around $144.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

Fuel Injector Replacement

What is a fuel injector?

Fuel injectors regulate the amount of pressurized fuel used for each engine cycle. There is one injector per cylinder in an engine.

How does the fuel injector work?

Each time an intake stroke occurs in the engine, the vehicle's computer will send a signal to the fuel injectors, requesting they spray fuel. For heavy acceleration, the duration of the fuel spraying will be longer than if the engine were idling.

What are the symptoms related to a bad fuel injector?

When a fuel injector fails or clogs, engine power is reduced and misfires will occur. The check engine light will turn on and, as the issue progresses, the engine may stall immediately after starting, fail to start, hesitate under throttle or vibrate roughly.

Can I drive with a fuel injector problem?

It's not smart to drive a vehicle with a fuel injector problem. These issues can cause the car to stall every few moments and accelerate unpredictably, creating a hazard. If the problem is bad enough, the vehicle may not even start, making it impossible to drive.

How often do fuel injectors need to be replaced?

On average, fuel injectors tend to fail after 80,000 miles, and require little maintenance. To prolong the life of the fuel injectors, follow the scheduled maintenance schedule for cleaning the fuel delivery system and injectors.

Jeep Fuel Injector Replacement Cost Estimates

The average cost for a Fuel Injector Replacement is between $302 and $376 but can vary from car to car.

Jeep Wrangler Fuel Injector Replacement Cost by Year

The average cost for a Jeep Wrangler Fuel Injector Replacement is between $302 and $376 but can vary from car to car.

Fuel Injector Replacement

Jump to:Commonly associated repairs Related OBD codes Cost estimates by vehicle Cost estimates by year

What is a fuel injector?

Fuel injectors regulate the amount of pressurized fuel used for each engine cycle. There is one injector per cylinder in an engine.

How does the fuel injector work?

What are the symptoms related to a bad fuel injector?

Can I drive with a fuel injector problem?

How often do fuel injectors need to be replaced?

If fuel delivery system symptoms are present, the technician will first conduct a visual inspection. If the issue isn't clear after a physical inspection, the technician will connect a computerized scanner to the vehicle to read some of its sensors. If there's a fuel injector problem, the technician would most likely find that misfires are happening frequently on one cylinder. The fuel injector or injectors in question must be tested, and may require removal for bench testing. Any failed components must be replaced, and the vehicle will be checked to ensure the problem is fixed.

How is a fuel injector replaced?

Typically, the intake manifold must be removed to access and replace the fuel injectors. This can be a large job that may involve draining the coolant and oil, removing many engine components, and replacing the intake manifold gasket. Some cars, though, are designed with plastic intake manifolds that do not have oil or coolant passages, making this process easier. Once access is available, the fuel injector is disconnected from the fuel rail and electrical connector and removed. The new one is then installed in its place.

RepairPal recommendations for fuel injector issues

When replacing fuel injectors, use high-quality, OEM parts. Keeping the injectors the same will ensure even power across the engine and a proper air-fuel mixture for all cylinders. This should result in smooth running.

What to look out for when dealing with fuel injector issues

When working with fuel, the battery should always be disconnected, and proper precautions taken against fire.

Can I replace the fuel injector myself?

This is not a DIY job. Fuel injector replacement should be left to a professional. The risk of fire is enough by itself, but this repair can also get very complicated. A good amount of knowledge goes into removing the injectors, intake manifold, fuel rail and other components, and if done wrong, it can further damage the vehicle.