Estimates last updated October 16, 2025

2014 GMC Yukon Wheel Speed Sensor Replacement Cost

The average cost for a 2014 GMC Yukon Wheel Speed Sensor Replacement is between $159 and $257.

Labor costs are estimated between $110 and $161 while parts are priced between $50 and $96.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

Wheel Speed Sensor Replacement

What is an ABS wheel speed sensor?

The wheel speed sensor is the primary data source for the ABS system. In order for the anti-lock brake (ABS) control module to react to driving conditions, wheel speed sensors (WSS) are placed on all four wheels, and constantly transmit the speed of each wheel to the ABS control module. They are mounted in the hub, close to the brake calipers, where they can monitor how fast the axle is turning.

How does the ABS wheel speed sensor work?

They are mounted in the hub, close to the brake calipers, where they can monitor how fast the axles are turning. All four WSS work in unison by providing four independent signals to the ABS control module, which allows the control module to correct for slipping if one or more wheels stop rotating. This action is responsible for highly reduced braking distances in slippery conditions.

What are the symptoms related to a bad ABS wheel speed sensor?

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

Can I drive with a ABS wheel speed sensor problem?

The vehicle can be driven with these warning lights on, since failure of the ABS or TCS does not disable the vehicle, but safety is a concern as drivers become accustomed to the road manners of their vehicle's. If hard braking that is normally controlled by the ABS control module is necessary, a collision may occur. We do recommend towing the vehicle to a repair facility if braking feels unusual under light or normal driving conditions.

GMC Wheel Speed Sensor Replacement Cost Estimates

The average cost for a Wheel Speed Sensor Replacement is between $159 and $257 but can vary from car to car.

GMC Yukon Wheel Speed Sensor Replacement Cost by Year

The average cost for a GMC Yukon Wheel Speed Sensor Replacement is between $159 and $257 but can vary from car to car.

Wheel Speed Sensor Replacement

What is an ABS wheel speed sensor?

How does the ABS wheel speed sensor work?

What are the symptoms related to a bad ABS wheel speed sensor?

Can I drive with a ABS wheel speed sensor problem?

How often do ABS wheel speed sensors need to be replaced?

Wheel speed sensors are notorious for failure, since they are housed on the wheel hub, near the road surface. This means the sensor and electrical connections are subject to dust, debris, precipitation, salt, and road hazards. Aside from that, brake dust and road grime are known to accumulate around the magnetic sensor, causing interference, and preventing proper readings. If the ABS and TCS lights are active, there is a very good chance you have a faulty wheel sensor, without regard to mileage.

How are ABS wheel speed sensor issues diagnosed?

Anti-lock braking systems are complex, and are typically diagnosed through professional computer scanning equipment, or manufacturer specific software. The technician will communicate with the ABS control module via computer, and view real-time data to determine what fault has been detected, and how the system is behaving. Once the technician identifies a suspected wheel speed sensor failure, physical inspection and probing will take place to ensure an accurate diagnosis. This includes inspecting the tip of the sensor for dirt and debris.

How is a ABS wheel speed sensor replaced?

Wheel sensor replacement is done by disconnecting the electrical connectors, and unscrewing the sensor from the wheel hub. On some models, the wheel sensor is non-serviceable, and the entire hub must be replaced. This involves removing the wheel, brakes, drive axles, if needed, and finally the wheel hub and bearing assembly. The lower ball joint will need to be disconnected from the steering spindle or lower control arm to allow the drive axle to move freely away from the wheel hub and bearing assembly.

RepairPal Recommendations for ABS wheel speed sensor issues

While inspecting and testing wheel sensors, the wheels may be removed from the vehicle, allowing the servicing technician to inspect brake and tire wear, as well as suspension components. Also, if the wheel speed sensor is determined to be malfunctioning due to dust and grime buildup, consider having the other wheel speed sensors examined to prevent future unexpected failures.

What to look out for when dealing with ABS wheel speed sensor issues

The wheel speed sensor is the most basic component in the ABS system, and the most likely to fail. The cost of a wheel sensor repair can be negligible, but if the sensor is non-serviceable the cost will rise dramatically as the mentioned disassembly and reassembly is required.

Can I replace the ABS wheel speed sensor myself?

Wheel speed sensors can be changed by the DIYer, but diagnosis should be left to a professional for time and cost savings. The cost of diagnostics is often less than replacing the wrong part, especially if the ABS light is on for a reason other than the wheel sensor. If speed sensor replacement requires wheel hub and bearing assembly removal, consider letting a certified repair facility complete the repair.