1999 Chrysler Cirrus Catalytic Converter Replacement Cost

The average cost for a 1999 Chrysler Cirrus Catalytic Converter Replacement is between $1,684 and $1,735.

Labor costs are estimated between $110 and $161 while parts are typically priced around $1,574.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.

Catalytic Converter Replacement

What is a catalytic converter?

A catalytic converter converts the harmful exhaust gases produced by the engine into less harmful emissions before they leave the vehicle's exhaust system. The catalytic converter looks similar to a muffler. It is typically a stainless steel housing with a ceramic honeycomb inside that is full of platinum, palladium and rhodium. These elements help clean up harmful exhaust gases that otherwise would be expelled from the tail pipe.

How does the catalytic converter work?

The catalytic converter has multiple sections, commonly referred to as beds. Each contains specific catalyst elements that work at a temperature of at least 400 degrees F to promote specific chemical reactions. This converts harmful CO, HC, and NOx exhaust gases into less harmful CO2, H2O, and N gases that are released from the vehicle's exhaust pipe.

A failing catalytic converter can cause a vehicle to fail emissions tests and the Check Engine Light to illuminate. The exhaust might have an unusual smell.

Need a repair? Trust our RepairPal Certified network.

With thousands of repair shops to choose from, how do you find one that is honest and fair? We've done the research for you.

Chrysler Catalytic Converter Replacement Cost Estimates

The average cost for a Catalytic Converter Replacement is between $1,684 and $1,735 but can vary from car to car.

Chrysler Town & Country

$2,708-$4,675

Chrysler 300

Chrysler Cirrus Catalytic Converter Replacement Cost by Year

The average cost for a Chrysler Cirrus Catalytic Converter Replacement is between $1,684 and $1,735 but can vary from car to car.

More RepairPal Resources

Catalytic Converter Replacement

What is a catalytic converter?

How does the catalytic converter work?

A failing catalytic converter can cause a vehicle to fail emissions tests and the Check Engine Light to illuminate. The exhaust might have an unusual smell.

A "restricted" catalytic converter can result in a loss of engine power.

What are the symptoms related to a bad catalytic converter?

A failing catalytic converter can cause a vehicle to fail emissions tests and turn on the check engine light. The exhaust might have an unusual smell. A restricted catalytic converter can result in a loss of engine power. » LEARN MORE: How to tell if your catalytic converter is failing

Can I drive with a catalytic converter problem?

If black smoke is coming from the exhaust, you should not drive the vehicle. This would indicate unburned fuel entering the converter, which can damage it.

How often do catalytic converters need to be replaced?

If the engine is running properly, the catalytic converter should last the life of the vehicle. When it fails, it's commonly caused by too much raw fuel entering the converter, often as a result of a misfiring engine. Too much unburned fuel can coat the catalyst, causing the converter to stop working. The converter can also overheat and break apart inside, becoming restricted or plugged. The catalytic converter is covered by the vehicle's emissions warranty, which extends beyond the manufacturer's factory warranty. Along with other emission control devices, federal law requires manufacturers to replace a defective converter for up to 15 years or 150,000 miles. Because this coverage varies by state and vehicle type, refer to your owner’s manual for your warranty information.

How are catalytic converter issues diagnosed?

It depends on the type of failure. If the car is experiencing a loss of power, a back-pressure test can check for a clog. If the check engine light is on, it may include a code that points to the converter. Or, if rattling noises are heard, the technician would need to confirm they are coming from the converter instead of other exhaust components.

It is very important to have the shop identify why the catalytic converter failed. Failure is almost always due to another problem, which if not resolved, will quickly ruin a new catalytic converter.

How is a catalytic converter replaced?

Most converters are bolted in place in the exhaust system, though some are welded or clamped down. Whatever the case, the converter must be loosened and removed. Some catalytic converters are built directly into the exhaust manifold, because they work most efficiently when hot. Never touch a catalytic converter while the engine is running or any time soon after it's been shut off.