2000 Chevrolet Impala Valve Cover Gasket Replacement Cost
The average cost for a 2000 Chevrolet Impala Valve Cover Gasket Replacement is between $267 and $375.
Labor costs are estimated between $220 and $322 while parts are priced between $47 and $53.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.
Valve Cover Gasket Replacement
What is a valve cover gasket?
The valve cover sits atop the cylinder head, and the valve cover gasket is sandwiched between them to keep circulating oil inside. The majority of valve cover gaskets are molded rubber, tailored to fit. In some cases, the spark plug tube gaskets are part of the valve cover gasket, and are replaced at the same time.
Valve cover gaskets are different than head gaskets.
Valve cover gaskets need to be replaced when they begin to leak oil. They can damage other engine components, especially belts and hoses.
Oil leaking from valve cover gaskets can result in a burning smell coming from under the hood.
What are the symptoms related to a bad valve cover gasket?
A bad valve cover gasket will result in an oil leak. You may notice oil under the car or on other parts under the hood. You might also notice a burning smell while driving.
» LEARN MORE:Signs of a bad valve cover gasket
Can I drive with a valve cover gasket problem?
A vehicle can still be driven with a leaking valve cover, but the leaking oil will cause other problems over time. Spark plug wells can fill with oil, causing a misfire. Oil dripping on coolant hoses will cause them to become soft and eventually burst. And the smell of burning oil will become more noticeable in the cabin.
How often do valve cover gaskets need to be replaced?
Repair intervals vary greatly by vehicle and driving conditions. The valve cover gasket does not wear like a tire or a ball joint, but eventually the gasket's rubber or cork will degrade to the point where it leaks.
How are valve cover gasket issues diagnosed?
It is easiest to spot oil leaks when they are new or fresh. The technician may clean the fluid around the leak and direct you to come back later to confirm where the leak is coming from. With more progressed oil leaks, the technician will also add a dye to the oil. After the vehicle has been driven with the dye, a UV light will be used to pinpoint the leakage and recommend repair.
Components such as spark plug tube seals and grommets can also leak oil, which can be mistaken for a leaking valve cover gasket. The seals and the valve cover gasket should always be replaced together. Some valve cover gasket kits may not include these seals and grommets, in that case the RepairPal estimate would not include them either and adding them could result in an additional cost for parts and labor to the customer.
How is a valve cover gasket replaced?
The technician will remove the valve cover, remove the old gasket, and clean all gasket surfaces before installing the new valve cover gasket. On some engines, removal of the intake manifold, or other major parts may be required in order to access the fasteners on the cover. After completion, the area will be checked for leaks.
Using high-quality valve cover gaskets will reduce the chance of recurring leaks and additional repairs.
