The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
When troubleshooting the tire pressure warning light in your Dodge Durango, start with the simplest solution: check the tire pressure. Use a reliable tire gauge to ensure all tires are inflated to the manufacturer's recommended levels, as low pressure is a common trigger for the warning light. If the pressure is adequate, inspect the tire pressure sensors to confirm they are functioning correctly and communicating with the vehicle's electronic control module. If everything appears normal, you can attempt to reset the warning light. This can be done by turning the ignition key to the "On" position without starting the engine and pressing the TPMS reset button until the light blinks three times. Alternatively, driving the vehicle for at least 20 minutes at a speed of 15 mph or more can also help reset the system. If the light remains illuminated after these attempts, repeat the reset process, as it may take a few tries to clear the warning. Addressing tire pressure issues promptly is essential for safe driving and to prevent potential tire damage.
When dealing with the tire pressure warning light in your Dodge Durango, it's essential to understand the common problems that may trigger this alert. One of the most frequent culprits is low tire pressure, which can occur due to temperature changes or slow leaks. Regularly checking and maintaining the correct tire pressure is vital for both safety and performance. Additionally, malfunctioning tire pressure sensors can lead to false warnings; these sensors may need inspection or replacement if they fail to communicate accurately with the vehicle's electronic control module. If the warning light persists after addressing tire pressure and sensor functionality, consider resetting the system. This can often be done by following specific steps outlined in your owner's manual or by driving the vehicle for a set period, which allows the system to recalibrate. Understanding these common issues and their solutions will empower you to effectively troubleshoot and resolve the tire pressure warning light in your Dodge Durango, ensuring a safer driving experience.
When the Tire Pressure Warning Light remains illuminated in your Dodge Durango, it is crucial to address the issue promptly to avoid potential safety hazards and costly repairs. Ignoring this warning can lead to decreased vehicle performance, increased tire wear, and even tire blowouts, which pose significant risks while driving. The light may indicate low tire pressure due to a leak or a malfunctioning tire pressure monitoring system (TPMS), both of which require immediate attention. If the light persists after correcting the tire pressure, it may signal a deeper issue, such as a damaged sensor or a need for system reset. Therefore, it is essential to inspect your tires regularly and ensure that the TPMS is functioning correctly. Taking these steps not only enhances your safety on the road but also prolongs the life of your tires and vehicle.
Read about related problems experienced by other Dodge Durango drivers like you.
See what others are asking about their Dodge Durango. Get answers from RepairPal's community of auto experts and enthusiasts.