The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2018 Dodge Durango, start with the simplest solutions before moving on to more complex diagnostics. Begin by checking the tire pressure of all tires, including the spare, ensuring they are inflated to the recommended PSI. If the pressure is correct, drive your vehicle for at least 20 minutes at a speed of 15 mph or more to see if the warning light resets. If the light remains illuminated, inspect each tire for signs of under or over-inflation, as this is a common cause for the warning. Additionally, examine the tires for any visible damage, such as leaks or punctures, which could also trigger the light. If everything appears normal, take a closer look at the tire pressure sensors located within each tire, as these can malfunction and cause the warning to persist. If necessary, reset the Tire Pressure Monitoring System (TPMS) to address any potential sensor issues or system errors. By following this diagnostic approach, you can systematically identify and resolve the tire pressure warning light issue in your vehicle.
When the tire pressure warning light remains illuminated in your 2018 Dodge Durango, it can be a source of concern, but understanding the common problems can help you diagnose the issue. One of the primary reasons for the warning light is low tire pressure, which can occur due to natural air loss or punctures. It's essential to check the pressure in all tires, including the spare, as driving on under-inflated tires poses safety risks. Additionally, extreme temperature fluctuations can affect tire pressure, causing the light to activate even if the tires seem adequately inflated. If you've confirmed that all tires are properly inflated and the light persists, the problem may lie with the tire pressure monitoring system (TPMS) itself. This could involve a malfunctioning TPMS module, issues with the vehicle's electronic control unit (ECU), or even electrical faults. In some cases, resetting the TPMS may be necessary after adjusting tire pressures, as certain models require this step to clear the warning light. By systematically checking these factors, you can effectively troubleshoot the issue and ensure your vehicle remains safe and roadworthy.
Addressing the tire pressure warning light that remains illuminated in a 2018 Dodge Durango is of utmost urgency due to the significant safety risks and potential for costly damage it presents. When this warning light is on, it typically indicates that one or more tires are under-inflated, which can severely compromise vehicle handling and increase the likelihood of accidents. Additionally, driving on under-inflated tires can lead to accelerated tire wear and decreased fuel efficiency, ultimately resulting in the need for premature tire replacement. Furthermore, a persistent warning light may signal a malfunction in the tire pressure monitoring system (TPMS), which could lead to inaccurate readings and further safety concerns. Therefore, it is crucial to take immediate action by checking tire pressures and, if the warning light does not turn off after adjustments, seeking professional assistance to diagnose and rectify any underlying issues. Ignoring this warning not only jeopardizes your safety but can also lead to significant repair costs down the line.
Read about related problems experienced by other Dodge Durango drivers like you.
See what others are asking about their Dodge Durango. Get answers from RepairPal's community of auto experts and enthusiasts.