The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2014 Dodge Durango, start with the simplest solution: checking the tire pressure. Ensure that each tire is inflated to the recommended PSI, as under-inflation is a common trigger for the warning light. If the pressure is correct, proceed to reset the warning light by driving for at least 20 minutes at a speed of 15 mph or more, which can often clear the alert. If the light remains illuminated, consider potential underlying issues such as a leaking tire, a malfunctioning tire pressure monitoring system (TPMS), or the impact of cold weather, which can cause pressure drops. Additionally, inspect the tire pressure sensors located within each tire, as they play a crucial role in monitoring air pressure and temperature. If necessary, follow the specific TPMS reset procedures for your vehicle, which may involve using the reset button typically found beneath the steering wheel. By systematically addressing these areas, you can effectively diagnose and resolve the tire pressure warning light issue, ensuring safe driving conditions.
When the tire pressure warning light stays on in a 2014 Dodge Durango, it can be frustrating, but understanding the common problems can help you troubleshoot effectively. Start by checking the tire pressure in all tires, including the spare, as low pressure is often the primary reason for the warning light. If you've recently inflated the tires, remember that the Tire Pressure Monitoring System (TPMS) may need the vehicle to be driven for a short distance to recalibrate and confirm that the pressures are now within the correct range. Additionally, a malfunctioning TPMS can keep the warning light illuminated, which could be due to issues like dead batteries in the sensors or damaged wiring. Environmental factors, such as significant temperature fluctuations, can also play a role, as colder weather can lead to a decrease in tire pressure. To resolve the issue, ensure that each tire is inflated to the recommended PSI and try resetting the warning light by driving for at least 20 minutes at a speed of 15 mph or more. If the light remains on after these steps, further investigation into the TPMS may be necessary to identify any underlying faults.
When the tire pressure warning light remains illuminated in your 2014 Dodge Durango, it is crucial to act swiftly. This warning is not just a minor inconvenience; it signals a potential issue with your tire pressure monitoring system or the actual tire pressure itself. Driving with improperly inflated tires can severely impact your vehicle's fuel efficiency and lead to significant tire damage, which could compromise your safety on the road. Alarmingly, underinflated tires contribute to numerous accidents, with over 200 fatalities reported annually due to tire-related incidents. The tire pressure monitoring system (TPMS) is designed to alert you to these dangers, making it essential to heed its warnings. Ignoring the light can result in further tire damage, poor vehicle handling, and increased safety risks. Therefore, it is imperative to check your tire pressure immediately, investigate any causes of pressure loss, and ensure the TPMS is functioning correctly. If the warning persists after addressing the tire pressure, consider resetting the TPMS or consulting a professional to prevent any potential hazards.
Read about related problems experienced by other Dodge Durango drivers like you.
See what others are asking about their Dodge Durango. Get answers from RepairPal's community of auto experts and enthusiasts.
