The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2012 Dodge Durango, start with the simplest solution: checking the tire pressure. Ensure that each tire is inflated to the recommended PSI, as both over-inflation and under-inflation can trigger the warning light. If the pressure is correct, proceed to reset the warning light by driving for at least 20 minutes at a speed of 15 mph or more. If the light remains illuminated, repeat the reset process. It's also essential to inspect the Tire Pressure Monitoring System (TPMS) to confirm that it is functioning correctly, as a malfunctioning sensor can cause the warning light to activate even when tire pressures are adequate. Additionally, consider seasonal factors, such as colder temperatures, which can lead to lower tire pressures. If you suspect a problem with the TPMS sensors themselves, located within each tire, a more detailed inspection may be necessary to address any potential system malfunctions. By following this diagnostic approach, you can systematically identify and resolve the issue with your tire pressure warning light.
When the tire pressure warning light remains on in a 2012 Dodge Durango, it often indicates a few common issues that can be resolved with some DIY troubleshooting. The first step is to check the tire pressure in all four tires, as low pressure is the most frequent cause of the warning light. If the pressure is within the recommended range, the next possibility is a faulty tire pressure sensor, which may need replacement. Additionally, the sensors could require recalibration to ensure they are functioning correctly, a process that can typically be done by following the vehicle's manual. It's also important to inspect the tire pressure monitoring system for any electrical faults, as wiring issues can lead to the light staying on. Lastly, if all else fails, performing a system reset might clear any temporary glitches causing the warning light to illuminate. By methodically addressing these potential issues, you can effectively troubleshoot and resolve the tire pressure warning light concern in your Dodge Durango.
Addressing the tire pressure warning light that remains illuminated in a 2012 Dodge Durango is of utmost importance due to the significant safety risks and performance issues it presents. The Tire Pressure Monitoring System (TPMS) serves as a critical alert mechanism, indicating that one or more tires may be under-inflated, which can severely compromise vehicle handling and stability. Ignoring this warning not only leads to increased tire wear and reduced fuel efficiency but also heightens the risk of tire blowouts, which can result in dangerous driving conditions. If the warning light persists even after inflating the tires, it may signal a malfunction within the TPMS or the presence of a tire leak, necessitating a thorough inspection of all tires. For DIY enthusiasts, promptly addressing this issue is essential to ensure safe driving and to prevent further damage to the vehicle, making it a priority that should not be overlooked.
Read about related problems experienced by other Dodge Durango drivers like you.
See what others are asking about their Dodge Durango. Get answers from RepairPal's community of auto experts and enthusiasts.
