2008 Dodge Durango Tire Pressure Warning Light Stays On

Common Causes for the Tire Pressure Warning Light in Your 2008 Dodge Durango and How to Resolve Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2008 Dodge Durango tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2008 Dodge Durango tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue on my 2008 Dodge Durango?

To effectively diagnose the tire pressure warning light issue on your 2008 Dodge Durango, begin with a straightforward approach that prioritizes simple checks before delving into more complex diagnostics. Start by checking the tire pressure in all four tires using a reliable tire pressure gauge, ensuring that the readings align with the recommended PSI found in your owner's manual or on the driver's side door jamb. Next, inspect each tire for visible damage, such as punctures or bulges, which could indicate a leak. Don’t overlook the valve stems; any signs of damage or leaks here can also lead to pressure issues. If you find that the tire pressure is low, use a tire inflator to bring it up to the correct level. After adjusting the pressure, it’s essential to reset the Tire Pressure Monitoring System (TPMS) as outlined in your owner's manual. Finally, keep an eye on the warning light; if it remains illuminated after these steps, it may signal a more serious problem with the TPMS that requires professional attention. By following this methodical approach, you can efficiently address the tire pressure warning light issue and ensure your vehicle's safety on the road.

What could cause the tire pressure warning light to stay on in a 2008 Dodge Durango?

When the tire pressure warning light stays on in a 2008 Dodge Durango, it can be a source of concern for any DIY enthusiast. The first step is to check the tire pressure in all four tires, as low pressure is the most common reason for the light to illuminate. If the pressure is within the recommended range, the issue may stem from a faulty tire pressure sensor, which might require replacement. Additionally, sensor calibration can sometimes be off, necessitating a recalibration process to ensure accurate readings. It's also important to consider potential electrical issues, such as damaged wiring or blown fuses, which can affect the tire pressure monitoring system. Lastly, a system reset may be needed to clear the warning light, and this can typically be done by following the steps outlined in the vehicle's manual. By methodically addressing these potential issues, you can effectively troubleshoot and resolve the tire pressure warning light problem in your Dodge Durango.

How urgent is it to address the tire pressure warning light that stays on in a 2008 Dodge Durango?

Addressing the tire pressure warning light in your 2008 Dodge Durango is not just a matter of convenience; it is a critical safety concern that requires immediate attention. When this warning light remains illuminated, it indicates that one or more tires may be underinflated, which can severely compromise your vehicle's handling and braking capabilities. This is particularly dangerous in adverse weather conditions, where the risk of accidents increases significantly. Moreover, driving on underinflated tires can lead to uneven wear, resulting in the need for premature tire replacements, which can be costly. Additionally, low tire pressure negatively impacts fuel efficiency, leading to higher fuel costs over time. Perhaps most concerning is the risk of tire damage or blowouts, which can occur if the issue is ignored. Therefore, it is essential to check and adjust your tire pressure according to the manufacturer's specifications as soon as the warning light activates, ensuring both your safety and the longevity of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.