Chevrolet Uplander Tire Pressure Warning Light Stays On

Common Causes for the Tire Pressure Warning Light in Your Chevrolet Uplander and How to Resolve Them

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a Chevrolet Uplander tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a Chevrolet Uplander tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

Troubleshooting Tire Pressure Warning Light in a Chevrolet Uplander

When dealing with the tire pressure warning light in your Chevrolet Uplander, it's essential to adopt a systematic diagnostic approach. Start by checking the tire pressure of all four tires, ensuring they are inflated to the manufacturer's recommended levels, which can be found in your owner's manual or on the doorjamb sticker. If the pressure is correct but the warning light persists, consider resetting the tire pressure monitoring system (TPMS) by driving at a speed of 50 mph or higher for at least 10 minutes, as this can often recalibrate the sensor. Should the light remain illuminated after these steps, inspect each tire for any signs of damage or leaks, and inflate any under-inflated tires to the proper pressure. Finally, once all adjustments are made, remember to reset the TPMS light to confirm that the system recognizes the new tire pressures. By following this methodical approach, you can effectively troubleshoot and resolve the tire pressure warning light issue, ensuring your vehicle remains safe and roadworthy.

What to Do When the Tire Pressure Warning Light Stays On in a Chevrolet Uplander?

When the tire pressure warning light stays on in your Chevrolet Uplander, it can signal various issues that need addressing. One of the most common problems is low tire pressure, which can be easily fixed by checking and inflating your tires to the recommended levels. If the tire pressure is correct, the next step is to reset the Tire Pressure Monitoring System (TPMS). This can be accomplished using a TPMS reset tool or by following the reset procedure detailed in your owner's manual. Additionally, driving at speeds of 50 mph or above for about 10 minutes can help recalibrate the system. If these methods do not resolve the warning light issue, it may indicate a malfunctioning sensor or a more complex problem within the TPMS that requires professional attention. Regularly monitoring your tire health and performing maintenance can help prevent these issues from occurring, ensuring a safer driving experience.

Why is the Tire Pressure Warning Light Staying On in a Chevrolet Uplander?

When the tire pressure warning light remains illuminated in your Chevrolet Uplander, it is crucial to address the issue without delay. Ignoring this warning can lead to unsafe driving conditions, as improperly inflated tires can significantly affect vehicle handling, braking, and overall safety. Additionally, driving on under-inflated tires can cause uneven wear, leading to premature tire failure and costly replacements. It is essential to first check the tire pressures using a reliable gauge and inflate them to the manufacturer's recommended levels. If the pressures are correct and the light persists, consider resetting the Tire Pressure Monitoring System (TPMS) as it may have been inadvertently tripped during a service. Furthermore, ensure that the TPMS sensors are functioning properly, as faulty sensors can trigger false alarms, complicating the situation. Remember, maintaining proper tire pressure is not just about vehicle performance; it is a critical aspect of road safety that should never be overlooked.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.