2016 Chevrolet Suburban Tire Pressure Warning Light Stays On

Tire Pressure Warning Light in 2016 Chevrolet Suburban: Causes and Solutions

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2016 Chevrolet Suburban tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2016 Chevrolet Suburban tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What are the initial steps to diagnose a tire pressure warning light that stays on in a 2016 Chevrolet Suburban?

When faced with a tire pressure warning light that remains illuminated in your 2016 Chevrolet Suburban, the first step is to check the tire pressure in all four tires, ensuring they are inflated to the manufacturer's recommended levels. If the pressure is correct and the light persists, the next logical step is to reset the Tire Pressure Monitoring System (TPMS). This can often resolve minor sensor issues. However, if the warning light continues to stay on after a reset, it may indicate a malfunctioning TPMS sensor, which could require replacement. It’s important to address this warning promptly, as driving with improperly inflated tires can lead to serious safety risks, including tire overheating and potential blowouts. By systematically checking tire pressure, resetting the system, and inspecting for sensor issues, you can effectively diagnose and potentially resolve the tire pressure warning light concern in your Suburban.

What could cause the tire pressure warning light to stay on in a 2016 Chevrolet Suburban?

When the tire pressure warning light remains illuminated in a 2016 Chevrolet Suburban, it often indicates underlying issues that can be addressed through careful inspection and maintenance. The most prevalent cause is low tire pressure, which can result from natural air loss, punctures, or leaks. DIYers should start by checking the pressure in all tires using a reliable gauge, ensuring they are inflated to the manufacturer's recommended levels. If the pressure is adequate, the next step is to examine the tire pressure sensors for any visible damage or corrosion, as a faulty sensor can prevent accurate pressure readings. Additionally, consider the age of the sensor batteries; if they are old or depleted, replacing them may resolve the issue. Wiring problems or system malfunctions can also contribute to the warning light staying on, so inspecting the wiring for any signs of wear or disconnection is advisable. Lastly, if recent tire service has been performed, recalibrating or resetting the sensors may be necessary to turn off the warning light. By following these steps, DIY enthusiasts can effectively diagnose and potentially resolve the tire pressure warning light issue in their Chevrolet Suburban.

How urgent is it to address the tire pressure warning light that stays on in a 2016 Chevrolet Suburban?

Addressing the tire pressure warning light in your 2016 Chevrolet Suburban is not just a matter of convenience; it is a critical safety concern that demands immediate attention. When this warning light remains illuminated, it signals that your tires may be underinflated, which can severely compromise your vehicle's handling and braking capabilities. This increases the likelihood of accidents, particularly in emergency situations where quick response is essential. Furthermore, driving on underinflated tires accelerates uneven wear, leading to premature tire replacement, which can be a costly endeavor. Additionally, low tire pressure negatively impacts fuel efficiency, resulting in higher fuel costs over time. Ignoring this warning can also lead to significant tire damage, including the risk of a blowout while driving. Therefore, it is crucial to check your tire pressure, inflate them to the recommended levels, and inspect for any leaks or damage as soon as the warning light activates. If the light persists despite these measures, it may indicate a more serious underlying issue that requires professional diagnosis. Taking prompt action not only ensures your safety but also protects your investment in your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.