Chevrolet Colorado Tire Pressure Warning Light Stays On

Common Causes for the Tire Pressure Warning Light in Your Chevrolet Colorado and How to Resolve It

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a Chevrolet Colorado tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a Chevrolet Colorado tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

Troubleshooting Tire Pressure Warning Light in a Chevrolet Colorado

When troubleshooting the tire pressure warning light in your Chevrolet Colorado, start by checking the tire pressures of all four tires, ensuring they are inflated to the manufacturer's recommended levels. If the light remains illuminated after adjusting the pressures, inspect each tire for visible signs of damage or leaks, as a slow leak can often be the culprit. Next, consider the functionality of the Tire Pressure Monitoring System (TPMS); a malfunctioning sensor or depleted battery could also trigger the warning light. If you encounter a "Service Tire Monitor System" message, this indicates a specific issue with the TPMS that requires attention. For a more thorough diagnosis, utilize a TPMS Relearn Tool to reset the system, following the appropriate steps for your model year. If the warning light persists despite these efforts, it may be necessary to consult a professional mechanic to address potential underlying issues, ensuring your vehicle remains safe and roadworthy.

Troubleshooting Tire Pressure Warning Light in Chevrolet Colorado

When dealing with a tire pressure warning light in your Chevrolet Colorado, it's essential to understand the common problems that could be causing the issue. One of the first steps is to check the tire pressure in all four tires, ensuring they are inflated to the recommended 35 PSI. If the light remains illuminated after adjusting the pressure, inspect each tire for visible damage or leaks, as a slow leak can often trigger the warning. Additionally, consider the possibility of a malfunctioning Tire Pressure Monitoring System (TPMS), which may occur if a sensor's battery is depleted or if the receiver module is faulty. If you encounter a "Service Tire Monitor System" message, this indicates a specific issue with the TPMS that requires attention. After addressing any tire-related problems, you may need to reset the TPMS according to your vehicle's manual, which can often be done through the driver information display or with a TPMS Relearn Tool. By systematically checking these common issues, you can effectively troubleshoot and resolve the tire pressure warning light in your Chevrolet Colorado, ensuring a safer driving experience.

What Should You Do When the Tire Pressure Warning Light Stays On in a Chevrolet Colorado?

When the tire pressure warning light remains illuminated in your Chevrolet Colorado, it is crucial to act promptly to ensure your safety and the longevity of your vehicle. Ignoring this warning can lead to serious consequences, such as tire blowouts or loss of vehicle control due to under-inflated tires. Start by safely pulling over to check the tire pressures using a reliable gauge, including the spare tire if applicable. If you find that the pressures are low, inflate them to the recommended levels immediately. After correcting the tire pressures, you may need to reset the TPMS light, which can often be done by following a simple manual reset procedure or driving the vehicle for a short distance. However, if the light persists despite correcting the tire pressures, it may indicate a deeper issue within the TPMS system that requires professional attention. Addressing these symptoms without delay not only enhances your safety on the road but also prevents potential damage to your tires and vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.